Sony KDL-40(46)(55)X4500 - Инструкция по эксплуатации - Страница 48

48

 GB

Auto DST

Sets whether or not to automatically switch between summer 
time and winter time.

Off

Displays the time according to the time 
difference set in “Time Zone”.

On

Automatically switches between summer 
time and winter time according to the 
calendar.

CA Module Set-up

Provides access to a pay TV service after you obtain a Conditional Access Module 
(CAM) and a view card. See page 21 for the location of the 

 (PCMCIA) socket.

Network Settings 

Network

IP Address 
Settings

Manual

Allows you to set the network settings 
according to your network environment. 

DHCP (DNS 
manual)

Automatically acquires the network 
settings except for DNS server settings. 
You can manually set the DNS settings.

DHCP (DNS 
automatic)

Automatically acquires the network 
settings through the Dynamic Host 
Configuration Protocol server function of 
the router or Internet service provider.

Test

Diagnoses whether the network is correctly connected.

IP Address/
Subnet Mask/
Default Gateway/
Primary DNS/
Secondary DNS

You need to configure each item when “Manual” is selected 
in “IP Address Settings”.
When “DHCP (DNS manual)” is selected, be sure to enter 
“Primary DNS” and “Secondary DNS” server addresses 
manually.

MAC Address

Displays the MAC address, which is a fixed, globally unique 
identifier of the network device.

Server Display 
Settings

Displays the connected server list and allows you to select the server you want to 
display on the Home Menu.

Server Diagnostics

Diagnoses whether the TV can connect to each server on the home network.

Renderer Function

Enables playback of photos or music on the TV through other control devices on 
the network, such as a digital still camera or mobile phone.

Renderer Access 
Control

Allows you to specify the accessible controller to the TV. When this setting is set to 
“On”, you can playback photos or music on the TV using the controller.

Renderer Set-up

Automatic 
Access 
Permission

Allows you to select whether to permit access to the TV 
automatically when a network device accesses the TV for the 
first time.

Renderer Name

Allows you to set the name of the TV to be shown on the 
controller.