Sony KDL-40(46)(55)X4500 - Инструкция по эксплуатации - Страница 27

27

 GB

Usin

g O

p

tion

al Eq

uipm

ent

Using BRAVIA Sync with 
Control for HDMI

The control for HDMI function enables the TV 
to communicate with the connected equipment 
that is compatible with the function, using 
HDMI CEC (Consumer Electronics Control).
For example, by connecting Sony equipment 
that is compatible with control for HDMI 
(with HDMI cables), you can control them 
together.
Be sure to connect the equipment correctly, 
and make the necessary settings.

Control for HDMI

•

Automatically turns the connected 
equipment off when you switch the TV to 
standby mode using the remote.

•

Automatically turns the TV on and 
switches the input to the connected 
equipment when the equipment starts to 
play.

•

If you turn on a connected audio system 
while the TV is on, the sound output 
switches from the TV speaker to the audio 
system.

•

Adjusts the volume (

2

 +/–

) and mutes the 

sound (

%

) of a connected audio system.

•

You can operate the connected Sony 
equipment that has the BRAVIA Sync logo 
by the TV remote by pressing:

–

N

/

x

/

X

/

m

/

M

 to operate the connected 

equipment directly.

–

SYNC MENU

 to display the menu of the connected 

HDMI equipment on the screen. 
After displaying the menu, you can operate the 
menu screen by using 

F

/

f

/

G

/

g

, 

, colour buttons, 

and 

RETURN

.

–

OPTIONS

 to display “Device Control”, then select 

options from “Options” and “Content List” to 
operate the equipment.

– Refer to the instruction manual of the equipment for 

available control.

•

If “Control for HDMI” of the TV is set to 
“On”, “Control for HDMI” of the 
connected equipment is also automatically 
switched to “On”.

To connect the equipment that is 
compatible with control for HDMI

Connect the compatible equipment and the TV 
with an HDMI cable. When connecting an 
audio system, be sure to also connect the 
DIGITAL AUDIO OUT (OPTICAL) jack of 
the TV and the audio system using an optical 
audio cable. For details, see page 21.

To make the control for HDMI settings

The control for HDMI settings must be set on 
both the TV side and connected equipment 
side. See “HDMI Set-up” on page 43 for the 
TV side settings. For settings on the connected 
equipment, refer to the operating instructions 
for that equipment.