Sony KDL-40(46)(55)X4500 - Инструкция по эксплуатации - Страница 53

53

 GB

Addi

tiona

l Info

rmati

o

n

Troubleshooting

Check whether the 

1

 (standby) indicator is flashing in red.

When the 

1

 (standby) indicator is flashing

The self-diagnosis function is activated. 

1

Count how many times the 

1

 (standby) indicator flashes between each two second break.

For example, the indicator may flash three times, go off for two seconds, then flash again three 
times.

2

Press 

1

 on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony 

service centre of how the indicator flashes (number of flashes).

When the 

1

 (standby) indicator is not flashing

1

Check the items in the tables below.

2

If the problem persists, have your TV serviced by qualified service personnel.

Condition

Explanation/Solution

Picture

There is no picture (screen is 
dark) and no sound.

• Check the aerial/cable connection.
• Connect the TV to the mains, and press 

1

 on the TV.

• If the 

1

 (standby) indicator lights up in red, press 

TV 

"/1

.

No picture or menu 
information from equipment 
connected to the scart 
connector appears on the 
screen.

• Press 

 to display the list of inputs, then select the desired input.

• Check the connection between the optional equipment and the TV.

Ghosting occurs, or double 
images appear.

• Check the aerial/cable connection.
• Check the aerial location and direction.

Only snow and noise appear 
on the screen.

• Check if the aerial is broken or bent.
• Check if the aerial has reached the end of its serviceable life (three to 

five years for normal use, one to two years when used at the seaside).

The picture is distorted (dotted 
lines or stripes appear).

• Keep the TV away from electrical noise sources such as cars, 

motorcycles, hair-dryers, or optical equipment.

• When installing optional equipment, leave some space between the 

optional equipment and the TV.

• Check the aerial/cable connection.
• Keep the aerial/cable TV cable away from other connecting cables.

There is picture or sound noise 
when viewing a TV channel.

• Adjust “AFT” (Automatic Fine Tuning) to obtain better picture 

reception (page 45).

Tiny black points and/or 
bright points appear on the 
screen.

• The screen is composed of pixels. Tiny black points and/or bright points 

(pixels) on the screen do not indicate a malfunction.

The picture contours are 
distorted.

• Select “Standard” or “Off” in “Motionflow” (page 40). If the symptom 

still persists, change the current setting of “Film Mode” to other settings 
(page 41).

The picture is not displayed in 
colour.

• Select “Reset” (page 37).

The picture from equipment 
connected to the 

COMPONENT IN1 or 2 

sockets is not displayed in 
colour, or is displayed in 
irregular colours.

• Check the connection of the 

COMPONENT IN1 or 2 sockets and 

check if the sockets are firmly seated in their respective sockets.

(Continued)