Sony KD-55X7500H - Инструкция по эксплуатации - Страница 13

− 13 (GB) −

GB

2 

Connect the necessary cable(s) 
to the TV.

Make sure to connect the cables before 
installing the TV on the wall. You will be 
unable to connect the cables when the TV 
is installed.
Refer to the Reference Guide supplied with 
your TV.

Note



Subcontract the cable routing in the wall to a licensed 
contractor.



Bundle the connecting cables to prevent stepping on 
them before wall mounting.

3 

Detach the Table-Top Stand 
from the TV.

Note



When installing the Wall-Mount Bracket, do not use 
the screws removed from the Table-Top Stand.



Be sure to store the removed screws and unused 
parts in a safe place, keeping them away from 
children.

KD-49X75xxH / 49X74xxH / 

43X75xxH / 43X74xxH

1 

Detach the Table-Top Stand 
from the TV.

Soft cloth

Note



Make sure to place TV on the place where you put a 
soft cloth on to prevent damaging display’s surface.



When installing the Wall-Mount Bracket, do not use 
the screws removed from the Table-Top Stand.



Be sure to store the removed screws and unused 
parts in a safe place, keeping them away from 
children.

WARNING



Be sure the TV is on the vertical position before 
switching on. TV set must not powered on with LCD 
panel face down to avoid uneven picture uniformity.



If pressure or shock is applied to the surface of the 
TV, the TV may break or become damaged.



Lay the TV face down on a stable and level surface 
with the Table-Top Stand hanging over the edge of 
the surface. Having the TV face and the base of the 
Table-Top Stand on the same level surface will create 
an unstable working condition and can damage the 
TV.



When detaching the Table-Top Stand from the TV, 
hold the Table-Top Stand securely.

2 

Attach the Attachment parts for 
Wall-Mount Bracket. Check the 
Attachment parts by referring to 
“Supplied with SU-WL450” in 
“Checking the parts” on page 
6.

Note



Firmly secure the Attachment parts using screws.



When using an electric screwdriver, set the torque 
setting to approximately 1.5 N·m {15 kgf·cm}.

Standard mounting (2-a)

Belt 



Spacer  
(60 mm)  



Screw  
(+PSW 6 x 50) 



Pulley 



Screw  
(+PSW 6 x 20) 



Soft cloth

Slim mounting (2-b)

Note



You cannot use some of the terminals on the rear of 
the TV when using this mounting style.