Samsung UE49K5100AUXRU - Инструкция по эксплуатации - Страница 43

The TV Signal Information is unavailable in the Self Diagnosis Test menu.

• 

This function is only available with digital channels from an Aerial / RF / Coax connection.

TV is tilted to the right or left side.

• 

Remove the stand base from the TV and reassemble it.

There are difficulties assembling the stand base.

• 

Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV, please use a magnetised screw 
driver.

The Broadcasting menu is grey out (unavailable).

• 

The 

Broadcasting

 menu is only available when the TV source is selected.

Your settings are lost after 5 minutes or every time the TV is turned off.

• 

If the TV is in the 

Store Demo

 mode, it will reset audio and picture settings every 5 minutes. If you want to change the 

settings from 

Store Demo

 mode to 

Home Use

, press the 

SOURCE

 button to select 

TV

 mode, and go to 

MENU

 - 

Support

 - 

Use Mode

.

You have intermittent loss of audio or video.

• 

Check the cable connections and reconnect them. 

• 

Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for 
long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

You see small particles when you look closely at the edge of the frame of the TV.

• 

This is part of the product’s design and is not a defect.

The PIP menu is not available.

• 

PIP

 functionality is only available when you are using a HDMI or components source.

You turned the TV off 45 minutes ago, and it turned on again.

• 

It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your 
watching TV.

There are recurrent picture/sound issues.

• 

Check and change the signal/source.

A reaction may occur between the rubber cushion pads on the base stand and the top finish of some 

furniture.

• 

To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.

The message “This file may not be playable properly.” appears.

• 

This may appear because of high bit rate of content. Content generally will play but could experience some playability 
issue.

You can keep your TV in optimum operating condition by upgrading to the latest firmware (www.samsumg.com → Support) 
by USB.
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there 
may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Some functions and pictures shown in this manual are available on specific models only.

Engl
ish

English - 15

UK5100B_RU_BN68-07408D-05_L04.indb   15

2016-07-25   �� 5:59:33