Samsung LE-32N71 B - Инструкция по эксплуатации - Страница 44

English-42

Setting the PC

Coarse and Fine Tuning of the Image (Image Lock):
The purpose of picture quality adjustment is to remove or reduce picture noise. If the 
noise is not removed by Fine-tuning alone, then adjust the 
frequency as best as possible (coarse) and Fine-tune again. After the noise has been 
reduced, re-adjust the picture so that it is aligned on the center of screen.

1. 

Preset: Press the 

PC 

button to select PC mode.

2. 

Press the 

MENU 

button to display the menu. 

 Press 

the 

 or 

 button to select “Setup”, then press the 

ENTER

 button.

3. 

Press the 

 or 

 button to select “PC”, then press the 

ENTER

 button.

4. 

Press the 

ENTER

 button to select “Image Lock”.

5. 

Press the 

 or 

 button to select “Coarse” or “Fine”, 

then press the 

ENTER

 button. 

6. 

Press the 

 or 

 button to adjust the screen quality. 

 Press 

the 

ENTER

 button.

7. 

Press the 

EXIT

 button to exit.

Changing the Image Position (Position):
Adjust the PC’s screen positioning if it does not fit the TV screen.

1. 

Follow the “Coarse and Fine Tuning of the Im

age (Image Lock)”  

instructions number 1 to 3.

2. 

Press the 

 or 

 button to select “Position”,  then press the

ENTER

 button.

3. 

Press the 

 or 

 button to adjusting the Vertical-Position. 

 Press 

the 

 or 

 button to adjust the Horizontal-Position. 

 Press 

the

ENTER

 button.

4. 

Press the 

EXIT 

button to exit.

Adjusting the PC Screen Automatically (Auto Adjustment):
Auto adjustment allows the PC screen of set to self-adjust to the 
incoming PC video signal. The values of fine, coarse and position are adjusted 
automatically

.

1. 

Follow the “Coarse and Fine Tuning of the Image (Image Lock)”  

instructions number 1 to 3.

2. 

Press the 

 or 

 button to select “Auto Adjustment”, 

then press the

ENTER

 button.

3. 

Press the 

EXIT 

button to exit.

Initializing the Image Settings (Image Reset):
You can replace all image settings with the factory default values.

1. 

Follow the “Coarse and Fine Tuning of the Image (Image Lock)”  

instructions number 1 to 3.

2. 

Press the 

 or 

 button to select “Image Reset”, 

then press the

ENTER

 button.

3. 

Press the 

EXIT 

button to exit.

Press the 

PC 

button on the  

remote control to select the PC  

 mode.