Samsung LE-32N71 B - Инструкция по эксплуатации - Страница 39

English-37

Setting Up the Remote to Operate Your DVD

1. 

Turn off your DVD.

2. 

Press the 

DVD

 button on your TV’s remote control.

3. 

Press the 

SET

 button on your TV’s remote control.

4. 

Using the number buttons on your remote control, enter three digits of the  

DVD code listed on page 39~40 of this manual for your brand of DVD. 

Make sure you enter three digits of the code, even if the first digit is a “0”.

(If there is more than one code listed, try the first one.)

5. 

Press the 

POWER

 button on the remote control. 

Your DVD should turn on if your remote is set up correctly.

If your DVD does not turn on after set up, repeat steps 2, 3, and 4, but try one of  

the other codes listed for your brand of DVD.

If no other codes are list-ed, try each code, 000 through 141.

Note on Using Remote Control Modes: DVD

When your remote control is in “DVD” mode, the volume buttons still control your TV’s volume.

Setting Up the Remote to Operate Your STB 

1. 

Turn off your STB.

2. 

Press the 

STB 

 button on your TV’s remote control.

3. 

Press the 

SET

 button on your TV’s remote control.

4. 

Using the number buttons on your remote control, enter three digits of the STB  

code listed on page 40 of this manual for your brand of STB. 

Make sure you enter three digits of the code, even if the first digit is a “0”.

(If there is more than one code listed, try the first one.)

5. 

Press the 

POWER

button on the remote control. 

Your STB should turn on if your remote is set up correctly.

If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of  

the other codes listed for your brand of STB. 

(If no other codes are listed, try each code, 000 through 074.)

Note on Using Remote Control Modes: STB

When your remote control is in “STB” mode, the volume buttons still control your TV’s volume.