LED KIVI 43U740LB - Инструкция по эксплуатации - Страница 17

Main menu -> Settings -> Channel -> Channel 
installation mode
Select a mode, select Antenna.
Go to Main Menu -> Settings -> Channel -> 
Channels.
Start scanning in the selected mode.

Main menu -> Settings -> Channel -> Channel 
installation mode
Select a mode, select Cable TV.
Select Main Menu - Settings - Channel - 
Channels.

Antenna

Cable

Select the channel scan mode, with a choice 
of local operators and the default scan 
mode.
Channel scan: automatic search with the 
ability to set some parameters (Advanced, 
Full, Fast).
Single RF Channel Scan: Manual Scan

You can also manually tune the channels if 
necessary or change their distribution in 
the list.

Note:

 The aspect ratio mode in the "Full 

Screen" image settings is intended for use 
with external sources connected via HDMI (in 
particular, a PC). The work of broadcast 
channels with this setting may differ from 
standard work.

System settings and functions

Inputs:

 Configuring TV operation with 

external devices.

Control HDMI devices: 

Activates the 

submenu of HDMI CEC functions.

CEC/ARC:

 Consumer Electronics Control 

(CEC) - consumer electronics management. 
ARC is an updated CEC technology and 
stands for Audio Return Channel.

By connecting an ARC / CEC-enabled device 
to the HDMI ARC port on your TV, you can 
control the power, volume, and other 
functions using your TV remote. In most 
cases, it will also be easy to transfer the TV 
sound to the device automatically, without 
turning off the built-in TV speakers. The 
connected device must also support ARC 
for this function to work.

Activate the function in HDMI settings

Automatically disconnect device: 

discon-

nect HDMI devices together with the TV.

Automatically turn on the TV: 

automatically 

turn on TV with HDMI device.

HDMI EDID ver.:

 setting the EDID version.

Signal sources (inputs)

16

EN