Sony KV-32LS60K - Инструкция по эксплуатации - Страница 19

19

GB

Connecting to external Audio Equipment:

Plug in your Hi-Fi equipment to the audio output sockets 

D

 if you wish to amplify the audio 

output from TV. Next , using the menu system, select the “Set Up” menu, enter the “Detail Set 
Up” menu and set “TV Speakers” to “Off”.

Audio level of the external speakers can be modified by pressing the volume buttons on the 
remote control. Also treble and bass settings can be modified through the “Sound 
Adjustment” menu.

To enjoy “Dolby Virtual” sound effect through your 
Hi-Fi equipment:

Place the speakers of your equipment in front of your 
listening position and beside the TV set but keeping a 
distance of 50 cm between each speaker and the TV set.
Then by using the menu system, select the menu “Sound 
Adjustment”. Next select “Dolby Virtual” on the “Effect” 
option.

Using Optional Equipment

1

Connect your equipment to the designated TV 
socket, as indicated in the previous page.

2

Switch on the connected equipment.

3

To watch the picture of the connected equipment, press the 

 button repeatedly until the

correct input symbol appears on the screen.

Symbol

Input Signals

1

• Audio / video input signal through the Scart connector 

E

1

• RGB input signal through the Scart connector 

E

. This symbol appears only

if an RGB source has been connected. 

2

• Audio / video input signal through the Scart connector 

F

. 

2

• RGB input signal through the Scart connector 

F

. This symbol appears only

if an RGB source has been connected. 

3

• Audio/video input signal through the Scart connector 

G

. 

3

• S Video Input signal through the Scart connector 

G

. This symbol appears 

only if an S Video source has been connected. 

4

• Video input signal through the phono socket 

B

 and Audio input signal

through 

C

. 

4

• S Video Input signal through the front S Video input jack 

A

 and Audio 

signal through 

C

. This symbol appears only if an S Video source has been 

connected. 

4

Press 

 button on the remote control to return to the normal TV picture. 

For Mono Equipment

Connect the phono plug to the L/G/S/I socket on the front of the TV and select 

4

 or 

4

input signal using the instructions above. Finally, refer to the “Sound Adjustment” section of 
this manual and select “Dual Sound” “A” on the sound menu screen.

S

S

S

Additional Information

Your sitting position

~50°

Right Hi-Fi

speaker

Left Hi-Fi

speaker