Sony KV-29FQ85K - Инструкция по эксплуатации - Страница 22

23

GB

Connecting Audio Equipment to the TV

Conect your audio equipment to the audio output sockets 

D

 if you wish to amplify the audio output from TV. Next 

, using the menu system, select the “Sound Adjustment” menu and set the “TV Speakers” to “One time off” or 
"Permanent off" (see page 13).

The volume of the external speakers can be altered by pressing the volume buttons on the remote control. The 
Treble and Bass settings can also be altered through the “Sound Adjustment” menu (see page 12).

To enjoy “Dolby Virtual” sound effect through your
audio equipment

Place the speakers of your equipment in front of your listening position and 
beside the TV set, keeping a distance of 50 cm between each speaker and the 
TV set.
Then by using the menu system, select the menu “Sound Adjustment”. Next 
select “Dolby Virtual” on the “Sound Effect” option (see page 12). 

Viewing pictures from equipment connected to the 
TV

1

Connect your equipment to the designated TV socket, as indicated in the previous page.

2

Switch on the connected equipment.

3

To watch the picture of the connected equipment, press the 

 button repeatedly until the correct 

input symbol appears on the screen.

 Symbol

Input 

Signals

1

• Audio / video input signal through the Scart connector 

G

1

• RGB input signal through the Scart connector 

G

. This symbol appears only if an 

RGB source has been connected. 

2

• Audio / video input signal through the Scart connector 

F

. 

2

• RGB input signal through the Scart connector 

F

. This symbol appears only if an 

RGB source has been connected. 

3

• Audio/video input signal through the Scart connector 

E

. 

3

• S Video Input signal through the Scart connector 

E

. This symbol appears only if 

an S Video source has been connected. 

4

• Video input signal through the phono socket 

B

 and Audio input signal through 

C

. 

4

• S Video Input signal through the front S Video input jack 

A

 and Audio signal 

through 

C

. This symbol appears only if an S Video source has been connected. 

4

   Press the 

 button on the remote control to return to the normal TV picture. 

For Mono Equipment

Connect the phono plug to the L/G/S/I  socket on the front of the TV and select 

4 or 

4 input 

signal using the instructions above. Next, refer to the “Sound Adjustment” section of this manual and 
set “Dual Sound” option to “A” on the sound menu screen (see page 12).

S

S

S

Additional Information

Your sitting position

~50°

Hi-Fi speakers