Sony KV-29FQ85K - Инструкция по эксплуатации - Страница 17

18

MANUAL PROGRAMME PRESET

This option allows you to:

a)

Preset channels or the VCR channel one by one to the programme order of your choice. 

To do this:

1

Once you have entered the “Set Up”menu as it is explained on page 16 and after selecting the "Manual 
Programme Preset" option, press 

OK

. Next with 

Programme

 option highlighted press 

OK

.

Press 

v

 or

V

 to select which programme number you want to preset the channel on (for VCR, select 

programme number “0”). Then press 

B

.

2

The following option is only available depending on the country you have selected in the “Country” 
menu.

After selecting the 

System

 option, press 

OK

. Then press 

v

or

V 

to select the TV Broadcast system (

B/G

for western European countries or 

D/K

 for eastern European countries. Then press 

B

.

3

After selecting the 

Channel Number

 option, press 

OK

. Next press 

v

or

V

 to select the channel tuning ("

C

" 

for terrestrial channels or "

S

" for cable channels). Then press the number buttons to enter directly the channel 

number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press 

b

 and 

v

or

V

 to search for it. When you have tuned the desired channel, press 

OK

 twice to store.

Repeat all the above steps to tune and store more channels.

b)

Label a channel using up to five characters.

To do this:

Once you have entered the “Set Up”menu as it is explained on page 16 and after selecting the "Manual 

Programme Preset" option, press 

OK

. Next with the 

Programme

 option, highlighted press the 

PROG +/-

 button 

to select the programme number with the channel you wish to name. When the programme you want to name 
appears on the screen, select the 

Label

 option and press 

OK

. Then, with the first element highlighted, press 

v

, 

V

, 

B

 or 

b

 to select the letter, next press 

OK

. When you have finished, press 

v

, 

V

, 

B

 or 

b

 to select the word 

“

End

” on the screen and finally press 

OK

 to turn off the menu from the screen.

• To correct the letter, select "

%

" on the screen to go back and press 

OK

.

• For a blank, select " " on the screen and press 

OK

.

c)

Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture, 

however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.

To do this: 

While watching the channel (TV Broadcast) you wish to fine tune, and once you have entered the “Set Up” menu 

as it is explained on page 16 and after selecting the "Manual Programme" option, press 

OK

. Then select the 

AFT

option and press 

b

. Next press 

v

or

V

 to adjust the fine tuning between -15 and +15. Finally press 

OK

 twice 

to store.

d)

Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.

To do this:

Once you have entered the "Set Up" menu as it is explained on page 16 and after selecting the "Manual 

Programme Preset" option, press 

OK

. Next with the 

Programme

 option highlighted, press the 

PROG +/-

 button 

to select the programme number you want to skip. When the programme you want to skip appears on the screen, 
select the 

Skip

 option and press 

b

. Next press 

v

or

V

 to select 

On

. Finally press 

OK

 twice to confirm and store.

To cancel this function afterwards, select “Off” instead of “On” in the step above.

e)

View and record scrambled channels (e.g. from a pay TV decoder) when using a decoder connected to Scart

3/

3 directly or through a VCR.

  This option is only available depending on the country you have selected in the “Country” menu. 

To do this:

Once you have entered the "Set Up" menu as it is explained on page 16 and after selecting the "Manual Programme 

Preset" option, press 

OK

. Next select the 

Decoder

 option and press 

b

. Next press 

v

or

V

 to select 

On

. Finally 

press 

OK

 twice to confirm and store.

To cancel this function afterwards, select "Off" instead of "On" in the step above.

S

TV Functions