Телевизоры кинескопные Philips 25PT5106 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
2
æ
Positioning the television set
Place your TV on a solid, stable surface, leaving a space of at least 5 cm
around the appliance.
To avoid accidents, do not put anything on the set such as a cloth or
cover, a container full of liquid (vase) or a heat source (lamp). The set
must not be exposed to water.
Â
Connections
• Insert the aerial plug into the
M
socket at the rear of the set.
Smaller sets are equipped with an internal aer ial. Under certain conditions ,
reception can be poor.You can improve it by repositioning the aerial. If the
reception remains unsatisfactory, an external aerial should be used.
• Insert the mains plug into a wall socket (220-240 V / 50 Hz).
ê
Remote control
Insert the two R6-type batteries (supplied) making sure that they are the
right way round.
The batteries supplied with this appliance do not contain mercur y or nickel
cadmium. Please do not discard your used batteries if you have access to a
recycling facility (if in doubt, consult your dealer). When the batteries are
replaced, use the same type.
®
Switching on
To switch on the set, press the on/off key.
A red indicator comes on and the screen lights up.
Go straight to the chapter
Quick installation
on the following page.
If the television remains in standby mode, press P
on the remote
control.
The indicator flashes when you use the remote control.
The television set has 4 keys which are located on the front or the top
of the set depending on the model.
The
VOLUME
- + (-
a
+) keys are used to adjust the sound level.
The
PROGRAM
- + (- P +) keys are used to select the required
programmes.
To access the menus, hold down the
VOLUME
- and
VOLUME
+ keys
simultaneously. Then use the
PROGRAM
- + keys to select an adjustment
and the
VOLUME
- + keys to make the adjustment.
To exit from the menu, hold down the
VOLUME
- and
VOLUME
+ keys
for a few seconds.
Note: when the LOCK function is activated, these keys are unavailable (see
page 6).
Installing your television set
The keys on the TV set
