Телевизоры кинескопные Philips 25PT5106 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
10
Poor reception or no picture
The proximity of mountains or high
buildings can cause ghost pictures, echoing
or shadows. If this is the case, try tuning the
picture using
FINE TUNE
(p. 4).
Do you have the right system (p. 4)?
Check that the aerial plug or euro c o n n e c t o r
plug is properly connected.
Check also that your aerial is capable of
receiving broadcasts in this frequency range
(
UHF
or
VHF
).
Adjusting the picture
If the picture is out of focus, or if you are
having difficulties finding the right settings,
select one of the Smart picture controls
( p. 7) and store it using the
P E R S O N A L
setting (p.5).
In case of bad reception (fuzzy picture), set
the
NOISE RED
to
ON
: p. 5.
The picture is in black and white
To read a video cassette, check that it is
recorded in the same format as that of the
video recorder (
PAL
,
SECAM
or
NTSC
).
No sound
If certain programmes have a picture but
no sound, this is because you do not have
the correct TV system (see p. 4).
Standby
When you switch on the set, if it remains
in standby mode and the
LOCKED
message
is displayed, this means that the
LOCK
function is activated (p. 5).
The set switches automatically to standby if it
re c e i ves no signals for a period of 15 minu t e s .
When it is in standby mode, the set uses
energy.To save electricity, we advise you to
switch it off using the on-off button.
Still having problems?
If the set breaks down, never try to repair
it yourself. Consult your after-sales service
department instead.
Tips
Video recorder key
The
key, on the side of the remote control, controls the main functions
of the video recorder.This key is only available on the remote control shown
opposite.
For the following commands, press
and:
standby,
/
enter a number,
bring up the video recorder menu*,
select*,
set*,
OK
confirm*.
P
select programme,
v
record,
s
rewind,
u
stop,
q
play,
r
fast forward,
G
programming*,
• Some programming features are not available on all video recorders (cursors,
menu, OK key, etc.).
The video recorder is compatible with our own-brand video recorders as well as with
all the models using the RC5 standard.
