Телефоны Elenberg CLPD-6335 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
23
• After 5 seconds, the telephone number will be shown. You can skip the
date/time by pressing the → button.
• Use the left scroll key ← to scroll to the previous call. Use the → button
to show the next call.
• You can leave the Call list by pressing the button.
Calling a number from the Call list
• Scroll through the Call list until the desired number is shown on the dis-
play.
• Press the Line button . The number will be dialed automatically.
Erasing a number from the Call list
• Scroll through the Call list until the desired number is shown on the dis-
play.
• Press and hold the Mute button for 3 sec. to erase the number.
Store a number from the call log into the memory
• Scroll through the Call list until the desired number is shown on the dis-
play. Press and hold the Memory button for 3 sec.
• Enter the memory location (0-9) where you want to store the number.
Enter the Memory button again to confirm and to go back to stand-
by.
Register to a Elenberg CLPD-63XX base
You can subscribe 4 handsets to one base unit. By default, each handset
is subscribed as handset 1 on the base unit upon delivery (base unit 1).
You only need to subscribe the handset if:
• The handset subscription has been removed from the base unit (e.g.
for re-initialization).
• You want to subscribe a different handset to this base unit.
The below procedure is only applicable to a Elenberg 63xx handset and
base unit!!
Keep the Paging key on the base unit pressed for 10 seconds until the
Line/Charge indicator on the base unit begins to blink rapidly. The Line/
Charge indicator will blink rapidly for one minute. During this minute,
the base unit is in register mode and you must do the following to sub-
scribe the handset:
• Press and hold the → key for 3 sec, then press and hold the * key for
3 sec.
• The following will appear on the display:
• Enter the number of the base unit you would
like to subscribe the handset to (1-4)
• The unit will start searching for the base and when found it will ask to
enter the pin code (4 digits):
• Enter the base pin code (0000). If the pin is
wrong, the handset will restart the searching
REGISTER/DE-REGISTER A HANDSET
