Телефоны Elenberg CLPD-6335 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
22
Key lock
When the keypad is locked, pressing any key will have no effect during
standby (except holding the key).
• Press and hold the , key
• appears on the display and the keypad is locked
• Press and hold the , key again to un-lock the keypad
When there is an incoming call, you can still answer the call by press-
ing the Line button . During the call, the keypad functions as normal.
When the call is ended, the keypad will be locked again
Setting the dialing mode
There are two types of dialing mode:
• DTMF/Tone dialing (the most common) (default)
• Pulse dialing (for older installations)
To change the mode of dialing:
• Press and hold the flash
button to toggle between dialing modes:
“P” will appear when set to pulse or “T” when set to tone (DTMF) dial-
ing.
• After 5 sec. the unit returns to standby.
Caution:
You can change by accident the dial mode of the phone when pressing
the recall/Flash key
for 5 sec in standby. The wrong dialing mode
will cause that the number isn’t dialed correctly or isn’t dialed at all.
The appliance’s displays the telephone numbers of incoming calls. This
function is only possible if you are subscribed to a telephone operator that
provides this service. Contact your telephone provider for more informa-
tion. When you receive a call, the numbers are saved in a Call list. This list
can hold 20 telephone numbers (each of max. 25 digits). If the number is
longer then 14 digits, you can press the
key to show the other dig-
its!
New calls
When you’ve received a new unanswered call, the CLIP symbol will
blink on the display.
Consulting the Call list
Press the Call Log button H. The last received call is shown on the dis-
play. If the list is empty, ‘NO CLIP’ is shown on the display.
The following will be shown
on the display:
* Only when the network sends
the time/date together with
the telephone number!!! On
some networks with caller ID,
time and date will not be displayed.
CALLER-ID FUNCTION (CLIP)
