Телефоны Elenberg CLPD-6335 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
19
Handset
Insert 2 rechargeable batteries
(AAA) inside the battery compart-
ment of the handset.
Put the handset on the base unit.
The red Charge LED
will lit as
long as the handset is on the base.
Charge the handset for a period of
24 hours before using the handset
for the first time. To extend the battery life time, discharge the batteries
completely from time to time. As soon as the handset emits a warning
tone or when the battery icon is empty, you have to put it back on the
base unit for charging.
When the battery is empty, the handset no longer carries out operations.
When a battery is completely empty and you have put the handset on the
base unit for a short period of time, the Battery symbol will appear to be
fully charged but this is actually not the case. The battery capacity will de-
crease rapidly. We advise you to put the handset on the base unit for 12 hrs
so that it can be recharged completely.
Full battery
Empty battery
When you are in the middle of a conversation and the battery is almost
empty, the handset will emit a warning signal. Place the handset on the
base unit to charge.
Outgoing calls
1. Making a phone call
• Press the Line button . You will hear the dial tone.
• Enter the desired telephone number.
• Press the Line button when you want to terminate the call.
2. Call setup with dial preparation
• Enter the desired telephone number. An incorrect number can be cor-
rected by means of the Mute button . When you haven’t pressed a
button for 10 seconds, the number you’ve already entered will disappear
and the handset returns to standby mode.
• Press the Line button . The number will be dialed automatically.
• Press the Line button when you want to terminate the call.
3. Redialing the last number dialed
• Press the Line key .
• The Line/Charge indicator
(LED) on the base unit will blink.
• You will hear the dial tone.
• Press the Redial key
. The number you last called is dialed automati-
BATTERY LOW INDICATION
OPERATION
