Телефоны Elenberg CLPD-6010 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
26
Handset Initial Setting
Function
Initial Setting
Dialing Mode
Tone
Handset Ringer Volume
3
Handset Ringer Pattern
2
Handset Receiver Volume
2
PIN Number
0000
Recall Time
100ms
Baby Mode
OFF
Battery replacement and handling
When the operating time becomes short even after a battery is recharged,
please replace the batteries.
With normal usage, your battery should last about one year.
Caution:
• Use only the specified battery type (AAA Ni-MH 1.2V, 550mAh).
• Only use rechargeable batteries.
• Never throw the battery into a fire, disassemble it or heat it.
• Do not remove or damage the battery casing.
Replace the batteries
1. Slide off the battery compartment cover.
2. Remove the batteries from the compartment.
3. Insert the new batteries according to the polarity printed.
4. Put the battery compartment cover back on.
5. Place handset on the base to charge for 16 hours.
Note: Charge the handset batteries for at least 16 hours continuously
prior to first use. The initial charge is important for best performance.
Batteries and handset may become warm during charging. This is nor-
mal.
Caution: To reduce the risk of fire or personal injury, use AAA 1.2V,
550mAh rechargeable batteries.
Under no circumstances should non-rechargeable batteries be used.
Only use the approved batteries will invalidate your warranty and may
damage the telephone.
When power is off, you will not be able to make or receive calls with the
DECT telephone.
CHANGING THE BATTERY
POWER FAILURE
