Телефоны Elenberg CLPD-6010 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
24
The Baby Mode feature is very useful and has many applications. This fea-
ture is available only when the baby mode is ON. In Baby Mode when the
key or any one of the dial keys are pressed the phone will automatically dial
any number that you have pre-programmed. Parents could pre-program
their mobile number for their children to make contact in the event of an
emergency. A mobile number can be pre-programmed for the baby-sitter,
for example.
To set a Baby Mode phone number
This is the number that will be called when the or any other dial keys
are pressed.
1. Press “P” and then [3] to enter the Baby Call number editing.
2. The screen will show “____“.
3. Enter the PIN number (the default setting is
“0000” if it has not been changed) followed by
“P” key.
Enter the phone number followed by “P” key (In case there has been a
previously programmed number, if you want to replace it, long press the
© key to clear the previous number and then enter new phone number
followed “P” key. Otherwise long press © key to clear all and then press
© key once again to exit. The previous number will be restored).
To set Baby Mode ON
1. Press the “P” and then the [2] key.
NOTE: If the Baby Mode phone number has not been programmed,
the phone will not enter the Baby Mode and will return to STANDBY
mode.
2. The screen will show “-— “as below
3. Enter the PIN number (the default setting is “0000” if it has not been
changed)
4. Press “P” key. The handset will enter the Baby Mode. A beep tone will
be emitted and the Baby Mode number will be flashing to indicate the
handset in the Baby Mode.
To set Baby Mode OFF
1. Press the “P” and then the [2] key.
2. The screen will show “-— “ to prompt for the PIN number.
3. Enter the PIN number then followed by “P” key.
4. The Baby Mode number will disappear from LCD and the handset will
return to normal mode.
BABY MODE
