Karcher WD 3 P-I (1.629-891.0) - Инструкция по эксплуатации - Страница 12

– 8

Illustration 



Adapt the adapter to the connection diameter of the 

electric tool using a knife if necessary.



Connect the adapter to the handle of the suction 

hose and connect it to the electric tool connection.

Connect the mains plug of the electric power tool to 

the vacuum cleaner.

Illustration 



Switch the vacuum cleaner to

 Position II

 and start 

working.

Note:

 As soon as the electric tool is switched on, the 

suction turbine starts with a 0.5 second delay. If the 

electric tool is switched off, the suction turbine contin-

ues to run for approx. 5 seconds in order to vacuum up 

the remaining dirt in the suction hose.

Cleaning hard to reach locations or, where vacuuming 

is not possible, like leaves from a gravel bed.

Illustration 



Connect the suction hose to the blower connection, 

this will activate the blower function.



Turn off the appliance. 

Illustration 



Hook the floor nozzle into the parking position.



Turn off the appliance and disconnect the mains plug.

Illustration 



Remove the appliance head and empty the reservoir.

Illustration 



Stow away the mains cable and accessory at the 

machine. Store the appliance in a dry room.



Clean the appliance and accessory parts made of 

plastic with a commercial plastic cleaner.



If required, rinse the container and accessories 

with water properly and dry them before reuse. 

Illustration 



Only clean the cartridge filter under running water; 

do not wipe or brush. Let it dry completely prior to 

installation.

If the cleaning power of the appliance deteriorates 

please check the following:



Accessories, suction hose or suction pipes are 

clogged, please remove the obstruction using a 

stick.

Illustration 



Filter bag is full, install new filter bag.

Illustration 



Cartridge filter is dirty, knock off dirt from cartridge 

filter and clean under running water if necessary.



Replace damaged cartridge filter.

The Specifications are listed on page IV. The following 

is an explanation of the symbols.

Subject to technical modifications!

Working with electrical power tools

Blowing function

Interrupting operation

Finish operation

Empty the container

Storing the appliance

Care and maintenance

Troubleshooting

Decreasing cleaning power

Technical specifications

Voltage

Output P

nom

Max. connection output of appliance socket

Mains fuse (slow-blow)

Container capacity

Water intake with handle

Water intake with floor nozzle

Power cord

Sound pressure level (EN 60704-2-1)

Weight (without accessories)

12

EN