Stanley SCH12S2 - Инструкция по эксплуатации - Страница 4

4

ENGLISH  

(Original instructions)

ENGLISH  

(Original instructions)

Intended use

Your Stanley SCH12 10.8V Li-Ion Hammer Drill has been 

designed for light fastening and drilling applications. This tool is 

intended for professional use.

Safety instructions
General power tool safety warnings

@

Warning! Read all safety warnings and all 

instructions. 

Failure to follow the warnings 

and instructions listed below may result in 

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in all of the warnings listed below refers 

to your mains operated (corded) power tool or battery operated 

(cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit.

 Cluttered or dark areas 

invite accidents.

b. Do not operate power tools in explosive atmospheres, 

such as in the presence of flammable liquids, gases or 

dust.

 Power tools create sparks which may ignite the dust or 

fumes.

c. Keep children and bystanders away while operating a 

power tool.

 Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify 

the plug in any way. Do not use any adapter plugs with 

earthed (grounded) power tools.

 Unmodified plugs and 

matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces 

such as pipes, radiators, ranges and refrigerators. 

There 

is an increased risk of electric shock if your body is earthed or 

grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric 

shock.

d. Do not abuse the cord. Never use the cord for carrying, 

pulling or unplugging the power tool. Keep cord away 

from heat, oil, sharp edges or moving parts.

 Damaged or 

entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension 

cord suitable for outdoor use.

 Use of a cord suitable for 

outdoor use reduces the risk of electric shock.

f. If operating a power tool in a damp location is unavoidable, 

use a residual current device (RCD) protected supply.

 Use 

of an RCD reduces the risk of electric shock.

3. Personal safety 

a. Stay alert, watch what you are doing and use common 

sense when operating a power tool. Do not use a power 

tool while you are tired or under the influence of drugs, 

alcohol or medication. 

A moment of inattention while operating 

power tools may result in serious personal injury.

b. Use personal protective equipment. Always wear eye 

protection. 

Protective equipment such as dust mask, non-skid 

safety shoes, hard hat, or hearing protection used for appropriate 

conditions will reduce personal injuries.

c. Prevent unintentional starting. Ensure the switch is in 

the off-position before connecting to power source and/or 

battery pack, picking up or carrying the tool.

 Carrying power 

tools with your finger on the switch or energising power tools that 

have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the 

power tool on.

 A wrench or a key left attached to a rotating part 

of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all 

times.

 This enables better control of the power tool in unexpected 

situations.

f. Dress properly. Do not wear loose clothing or jewellery. 

Keep your hair, clothing and gloves away from moving 

parts. 

Loose  clothes,  jewellery  or  long  hair  can  be  caught  in 

moving parts.

g. If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used. 

Use of dust collection can 

reduce dust-related hazards.

4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for 

your application. 

The  correct  power  tool  will  do  the  job  better 

and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn it on 

and off. 

Any power tool that cannot be controlled with the switch 

is dangerous and must be repaired.

c. Disconnect the plug from the power source and/or 

the battery pack from the power tool before making any 

adjustments, changing accessories, or storing power tools. 

Such preventive safety measures reduce the risk of starting the 

power tool accidentally.

d. Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool or 

these instructions to operate the power tool.

 Power tools are 

dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding 

of moving parts, breakage of parts and any other condition 

that may affect the power tools operation. If damaged, have 

the power tool repaired before use. 

Many accidents are 

caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind and 

are easier to control.

g. Use the power tool, accessories and tool bits etc. in 

accordance with these instructions, taking into account the 

working conditions and the work to be performed.

 Use of