Sparky BUR2 12Li-C HD - Инструкция по эксплуатации - Страница 8

6

BR2 12Li-C HD • BUR2 12Li-C HD

EN

General charger safety warnings

▪

This charger is not intended for use by children and persons with physical, 

sensory or mental limitations or a lack of experience or knowledge.

▪

This appliance can be used by children aged from 8 years and above, 

persons with reduced physical, sensory or mental capabilities or lack of 

experience and knowledge if they have been given supervision or instruc-

tion concerning use of the appliance in a safe way and they understand 

the hazards involved. Children shall not play with the appliance. Cleaning 

and user maintenance shall not made by children without supervision.

ways unplug the charger from the power supply when 

there is no battery pack in the cavity. Unplug charger 

before attempting to clean.

▪

Always unplug the charger from the power socket 

when not in use and store it in a dry and safe place.

Additional instructions  

for work with the battery pack

▪

The battery pack has been delivered partially charged. 

You must charge the battery pack fully before use.

WARNING:

 If the battery pack is cracked or 

damaged in any other way, do not insert it in the charg-

er. There is a danger of electric shock.

▪ Battery fluid may leak under unfavourable conditions, 

avoid contact. In case you touch the liquid acciden-

tally, rinse skin with water. If battery liquid comes in 

contact with your eyes, seek further medical attention. 

Released battery liquid may cause irritation or burns.

WARNING:

 Never attempt to open the battery 

pack for any reason.  If the plastic housing of the bat-

tery pack breaks or cracks, return to a service centre 

for recycling.

▪

Recharge a battery pack with the original charger 

only. A charger appropriate for one type of battery 

pack may pose a risk when used with another type.

▪

Always use correct SPARKY battery pack (the one 

supplied with tool or a replacement pack exactly like 

it). Never install any other battery pack. It will ruin your 

tool and may create a hazardous condition.

▪

When battery is not in use, keep it away from other 

metal objects like paper clips, coins, keys, nails, 

screws, or other small metal objects that can make 

a connection from one terminal to another. Shorting 

the battery terminals together may cause fire or ex-

plosion.

▪

The battery pack should be recharged when it fails to 

produce sufficient power on jobs, which were easily 

Additional instructions  

for work with the charger

▪

Before using the charger, read all the instructions and 

cautionary markings on the charger and battery pack 

as well as the instructions on using the battery pack.

▪

Only charge your batteries indoors as the charger is 

designed for indoor use only.

▪

The charger is not intended for any use other than 

charging the exact type of SPARKY rechargeable 

battery pack. Any other use may result in the risk of 

fire or electric shock.

▪

Do not place any object on top of the charger as it 

could cause overheating. Do not place the charger 

near any heat source.

▪

Do not pull on the lead of the charger to disconnect it 

from the power source.

▪

Make sure that the charger cord is positioned where it 

will not be stepped on, tripped over or otherwise sub-

jected to damage or stress.

▪

Do not use an extension cord unless it is absolutely 

necessary. The use of an improper extension cord 

could cause the risk of fire or electric shock.

▪

Do not use the charger if it has been subjected to a 

heavy knock, dropped or otherwise damaged in any 

way. 

▪

Do not operate charger with damaged cord or plug. If 

the replacement of the supply cord is necessary, this 

has to be done by the manufacturer or his agent in 

order to avoid a safety hazard.

▪

To reduce the risk of an electric shock, unplug the 

charger from the power supply before attempting to 

clean it. Removing the battery alone does not reduce 

the risk.

▪

Do not store or use the tool and battery pack in lo-

cations where the temperature may reach or exceed 

40°C, such as alongside sheds, trailers or metal struc-

tures.

▪

Do not attempt to connect the charger to a network 

with different supply voltage, other than the specified 

on the technical data label of the charger.

▪

The exposed contacts inside the charger can be 

shorted by foreign material if the charger is plugged 

into the power supply. Conductive materials should be 

kept away from the socket and the ventilation slots. Al-

pages B[U]R2_12Li-C_HD-133137V1.indd   6

7.2.2018 г.   8:47:33