Sparky BUR2 12Li-C HD - Инструкция по эксплуатации - Страница 12

10

BR2 12Li-C HD • BUR2 12Li-C HD

EN

BUR2 12Li-C HD

 - Set the operation mode selector 

switch (12) against the symbol “screw”.

WARNING:

 Over-tightening can result in the 

screw breaking or damage to the end of the driver bit. 

WARNING:

  If the machine is held at an angle 

to the screw being tightened, the head of the screw 

may be damaged, or the specified torque may not be 

transmitted to the screw. Always keep the machine 

and the screw being tightened in a straight line.

Maintenance

WARNING:

 Always set the forward/reverse 

switch (3) in central position before any work on the 

machine  e.  g.  fitting  and  removing  a  battery,  tool 

change, transport, maintenance and storage. 

Regularly check that all the fixing screws are tight. They 

may vibrate loose over time.

CLEANING

For safe operation always keep the machine and its ven

-

tilation slots clean.

Regularly check to see if any dust or foreign matter has 

entered the grills near the motor and around the switch-

es. Use a soft brush to remove any accumulated dust. 

Wear safety glasses to protect your eyes whilst cleaning. 

If the body of the tool needs cleaning, wipe it with a soft 

damp cloth. A mild detergent can be used.

WARNING:

 Never use alcohol, petrol or other 

cleaning agent. Never use caustic agents to clean 

plastic parts.

WARNING:

 Water must never come into con-

tact with the tool.

CHARGER CLEANING INSTRUCTIONS

WARNING:

 Disconnect the charger from the 

AC outlet before cleaning.

▪

Dirt and grease may be removed from the exterior of 

the charger using a cloth or soft non-metallic brush. 

Do not use water or any cleaning solutions.

IMPORTANT!

 To assure product safety and reliability, 

repairs, maintenance and adjustment (including brush 

inspection and replacement) should be performed by 

certified  service  centres  or  other  qualified  service  or

-

ganisations, always using genuine replacement parts.

 Recycling

The machine, accessories and packaging should be 

sorted for environmental-friendly recycling.

Batteries, chargers, accessories and packaging shall be 

submitted to extraction for utilization of secondary raw 

materials. 

For EU-countries only: 
Do not dispose of the power tool into household 

waste!

 According to the guidelines 2012/19/EU, power 

tools, which are not usable, should be recycled.  

Batteries: 

  Do not dispose of the power tool or the bat-

tery into household waste, fire or water.

 All 

type of batteries should be sorted for environ-

mental-friendly recycling or destroyed. 

For EU-countries only: 

Defective or worn out batteries must be recycled accord-

ing to the guidelines 2006/66/EC. 

Warranty

The guarantee period for SPARKY power tools is deter-

mined in the guarantee card.

Faults due to normal wear, overloading or improper han

-

dling will be excluded from the guarantee. 

Faults due to defective materials implemented as well as 

defects in workmanship will be corrected free of charge 

through replacement or repair.

The complaints for defective SPARKY power tools will 

be recognized if the machine is sent back to the dealer 

or is presented to the authorised warranty service centre 

undismantled, in its initial condition.

Notes

Carefully read the entire Original Instructions before us-

ing this product.

The manufacturer reserves the right to change specifica

-

tions without notice.

Specifications may differ from country to country.

pages B[U]R2_12Li-C_HD-133137V1.indd   10

7.2.2018 г.   8:47:34