Sparky BUR2 12Li-C HD - Инструкция по эксплуатации - Страница 7

5

Original instructions

EN

rate for which it was designed.

b) Do not use the power tool if the switch does 

not turn it on and off. 

Any power tool that can-

not be controlled with the switch is dangerous and 

must be repaired.

c) Disconnect the plug from the power source 

and/or the battery pack from the power tool 

before making any adjustments, changing ac-

cessories, or storing power tools. 

Such preven-

tive safety measures reduce the risk of starting the 

power tool accidentally.

d) Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with 

the power tool or these instructions to operate 

the power tool. 

Power tools are dangerous in the 

hands of untrained users.

e) Maintain power tools. Check for misalignment 

or binding of moving parts, breakage of parts 

and any other condition that may affect the 

power tool’s operation. If damaged, have the 

power tool repaired before use. 

Many accidents 

are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges 

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits 

etc. in accordance with these instructions, tak-

ing into account the working conditions and 

the work to be performed. 

Use of the power tool 

for operations different from those intended could 

result in a hazardous situation.

5. BATTERY TOOL USE AND CARE

a) Recharge only with the charger specified by 

the manufacturer.

 A charger that is suitable for 

one type of battery pack may create a risk of fire 

when used with another battery pack.

b) Use power tools only with specifically desig-

nated battery packs. 

Use of any other battery 

packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away 

from other metal objects, like paper clips, 

coins, keys, nails, screws or other small metal 

objects, that can make a connection from one 

terminal to another. 

Shorting the battery termi-

nals together may cause burns or a fire.

d) Under abusive conditions, liquid may be eject-

ed from the battery; avoid contact. If contact 

accidentally occurs, flush with water. If liquid 

contacts eyes, additionally seek medical help. 

Liquid ejected from the battery may cause irritation 

or burns.

6. SERVICE

a) Have your power tool serviced by a qualified 

repair person using only identical replacement 

parts.

 This will ensure that the safety of the power 

tool is maintained.

Additional safety rules  

for cordless drills / drivers

▪

Be aware that this tool is always in an operating condi-

tion, because it does not have to be plugged into an 

electrical outlet. Always set the trigger switch to the 

locked OFF position when installing or removing the 

battery pack.

▪

Wear ear protectors when impact drilling

. 

Expo-

sure to noise can cause hearing loss.

▪

Use the auxiliary handle if supplied with the ma-

chine.

Loss of control can cause personal injury.

▪

Hold the power tool by insulated gripping sur-

faces when performing an operation where the 

cutting accessory may contact hidden wiring. 

Contact with a “live” wire will make exposed metal 

parts of the power tool “live” and shock the operator. 

▪

If possible, always use clamps or a vice to hold your 

work.

▪

Do not touch the bit after operation. It will be very hot.

▪

When using the drill, use safety equipment including 

safety glasses and ear defenders. Wear a dust mask 

if the drilling operation creates dust.

▪

The dust, separated while processing materials, con-

taining quartz (SiO

2

) is dangerous to your health. Do 

not process materials containing asbestos.

▪

The tool must be used only for its prescribed purpose. 

Any use other than those mentioned in this Manual 

will be considered a case of misuse. The user and not 

the manufacturer shall be liable for any damage or in-

jury resulting from such cases of misuse.

▪

To use this tool properly, you must observe the safety 

regulations, the assembly instructions and the oper-

ating instructions to be found in this Manual. All per-

sons who use and service the machine have to be 

acquainted with this Manual and must be informed 

about its potential hazards. Children and frail people 

must not use this tool. Children should be supervised 

at all times if they are in the area in which the tool is 

being used. It is also imperative that you observe the 

accident prevention regulations in force in your area. 

The same applies for general rules of occupational 

health and safety.

▪

The manufacturer shall not be liable for any changes 

made to the tool nor for any damage resulting from 

such changes.

Even when the tool is used as prescribed it is not pos-

sible to eliminate all residual risk factors. The following 

hazards may arise in connection with the tool’s construc-

tion and design:

▪

Damage to the lungs if an effective dust mask is not 

worn.

▪

Damage to hearing if effective ear defenders are not 

worn.

▪

Power tools must not be used outdoors in rainy weath-

er, or in moist environment (after rain) or in close vicin-

ity with easily flammable liquids and gases. The work-

ing place should be well lit.

pages B[U]R2_12Li-C_HD-133137V1.indd   5

7.2.2018 г.   8:47:33