Makita DHP458Z LXT 18V - Инструкция по эксплуатации - Страница 5

5 ENGLISH

Vibration

The vibration total value (tri-axial vector sum) deter

-

mined according to EN62841-2-1:

Model DHP448

Work mode: impact drilling into concrete

Vibration emission (a

h,ID

) : 8.5 m/s

2

Uncertainty (K) : 1.5 m/s

2

Work mode: drilling into metal

Vibration emission (a

h,D

) : 2.5 m/s

2

 or less

Uncertainty (K) : 1.5 m/s

2

Model DHP458

Work mode: impact drilling into concrete

Vibration emission (a

h,ID

) : 9.5 m/s

2

Uncertainty (K) : 1.5 m/s

2

Work mode: drilling into metal

Vibration emission (a

h,D

) : 2.5 m/s

2

 or less

Uncertainty (K) : 1.5 m/s

2

NOTE:

 The declared vibration total value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared vibration total value(s) may also 

be used in a preliminary assessment of exposure.

WARNING:

The vibration emission during 

actual use of the power tool can differ from the 

declared value(s) depending on the ways in which 

the tool is used especially what kind of workpiece 

is processed.

WARNING:

Be sure to identify safety mea-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specifications provided 

with this power tool.

 Failure to follow all instructions 

listed below may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Cordless hammer driver drill safety 

warnings

Safety instructions for all operations

1. 

Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

2. 

Use the auxiliary handle(s).

 Loss of control can 

cause personal injury.

3. 

Hold the power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory or fasteners may contact 

hidden wiring. 

Cutting accessory or fasteners 

contacting a "live" wire may make exposed metal 

parts of the power tool "live" and could give the 

operator an electric shock.

4. 

Always be sure you have a firm footing. Be 

sure no one is below when using the tool in 

high locations.

5. 

Hold the tool firmly.

6. 

Keep hands away from rotating parts.

7. 

Do not leave the tool running. Operate the tool 

only when hand-held.

8. 

Do not touch the drill bit or the workpiece 

immediately after operation; they may be 

extremely hot and could burn your skin.

9. 

Some material contains chemicals which may 

be toxic. Take caution to prevent dust inhala-

tion and skin contact. Follow material supplier 

safety data.

10. 

If the drill bit cannot be loosened even you 

open the jaws, use pliers to pull it out.

 In such a 

case, pulling out the drill bit by hand may result in 

injury by its sharp edge.

Safety instructions when using long drill bits

1. 

Never operate at higher speed than the max-

imum speed rating of the drill bit.

 At higher 

speeds, the bit is likely to bend if allowed to rotate 

freely without contacting the workpiece, resulting 

in personal injury.

2. 

Always start drilling at low speed and with the 

bit tip in contact with the workpiece.

 At higher 

speeds, the bit is likely to bend if allowed to rotate 

freely without contacting the workpiece, resulting 

in personal injury.

3. 

Apply pressure only in direct line with the bit 

and do not apply excessive pressure.

 Bits can 

bend causing breakage or loss of control, resulting 

in personal injury.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace 

strict adherence to safety rules for the subject 

product. MISUSE or failure to follow the safety 

rules stated in this instruction manual may cause 

serious personal injury.