Шуруповерты FLEX PD 2G 18/2.5 Set 436585 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
PD 2G / DD 2G / ID 1/4"
16
Intended use
The PD 2G 18.0 cordless impact drill driver
is intended
– for commercial use in industry and trade,
– for inserting and releasing screws,
– for drilling in wood, metal, ceramic and
plastic,
– for impact drilling in brick, masonry and
stone.
The DD 2G 18.0 cordless drill driver is
intended
– for commercial use in industry and trade,
– for inserting and releasing screws,
– for drilling in wood, metal, ceramic and
plastic.
The ID 1/4" 18.0 cordless impact driver is
intended
– for commercial use in industry and trade,
– for tightening and releasing nuts and
screws in the specified dimensions.
Safety instructions for drills and
drivers
Hold the power tool by the insulated
gripping surfaces when performing an
operation where the cutting accessory or
the screw may contact hidden wiring or
its own power cord.
The screw contacting a “live” wire may
make exposed metal parts of the power
tool “live” and cause an electric shock.
Use auxiliary handles if these are
supplied with the power tool. The loss of
control may result in injuries.
Use suitable detectors to detect
concealed power supply cables or
consult your local supply company.
Contact with electric cables may result in
a fire and/or electric shock. A damaged
gas pipe may cause an explosion. Cutting
into a water pipe will cause damage to
property.
Switch off the power tool immediately
when the cutting accessory jams. Be
prepared for high reaction torques which
cause kickback. The cutting accessory
jams when:
– the power tool is overloaded
or
– it snags in the workpiece to be
machined.
Maintain a firm grip on the power tool.
High reaction torques can occur briefly
when screws are tightened and released.
Secure the workpiece. A workpiece is
held more securely in a clamping device or
vice than by hand.
Wait until the power tool has come to
a stop before putting it down. The cutting
accessory may snag, causing the operator
to lose control of the power tool.
Do not open the battery. Short-circuiting
hazard!
Protect the battery against heat,
including prolonged sunshine, fire, water
and moisture. Explosion hazard!
A damaged or incorrectly used battery may
result in the emission of fumes. Ensure a
supply of fresh air and consult a doctor in
the event of any physical complications.
The fumes may irritate the respiratory
tracts.
Additional safety instruction for
impact drill driver (PD 2G 18.0)
Wear ear defenders when impact drilling.
The effect of noise may result in loss of
hearing.
Charger
Always check whether the mains voltage
matches the voltage indicated on the
type plate of the charger.
The charger plug must fit in the power
socket. Never modify the plug in any
way. Do not use any adapter plugs
together with earthed (grounded) power
tools. Unmodified plugs and matching
power sockets will reduce the risk of
electric shock.
