Шуруповерты CROWN CT21076HMX - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
31
English
Symbol
Meaning
Locked�
Unlocked�
Prohibited�
"Screwing" mode�
"Drilling" mode�
"Impact drilling" mode�
Drill tiles in the impactless
drilling operation mode only�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Attention� Important�
Useful information�
Wear protective gloves�
Stepless speed control�
Do not dispose of the power
tool in a domestic waste
container�
Power tool designation
The power tool has been designed for hole drilling in
wood, plastic and metal, as well as for screwing in and
loosening of threaded fastening elements (screws,
bolts, etc�)�
[CT21075HMX-2, CT21075HMX-4]
These models allow the impact drilling in brick, cement
and similar materials�
[CT21076HQX-2, CT21076HQX-4]
These models deliver with quick-change attachments
(keyless chuck, eccentric tool holder and angle tool hold-
er) that allow to perform works in hard-to-reach places�
Power tool components
1
Additional handle *
2
Depth stop *
3
Universal tool holder
4
LED lamp
5
Battery lock *
6
Control button of the state of battery charge *
7
Indicators of the state of battery charge *
8
Clamping screw *
9
Step speed selector switch
10
Ventilation slots
11
Torque regulator
12
Reverse switch
13
On / off switch
14
Belt clip *
15
Battery *
16
Charger *
17
Quick-change keyless chuck *
18
Quick-change eccentric tool holder *
19
Quick-change angle tool holder *
20
Keyless chuck
21
Function switch
22
Lock of quick-change attachment *
23
Screwdriver bit *
24
Screw
25
Magnetic holder *
26
Label *
27
Indicator (red) *
28
Indicator (green) *
* Optional extra
Not all of the accessories illustrated or described
are included as standard delivery.
Installation and regulation of power tool
elements
Before execution of any procedures, centre the
reverse switch 12.
Do not draw up the fastening ele
-
ments too tight to avoid damaging the
thread.
Mounting / dismounting / setting-up of
some elements is the same for all power
tool models, in this case specific models
are not indicated in the illustration.
