CROWN CT21076HMX - Инструкция по эксплуатации - Страница 30

30

English

be more secure than holding the workpiece with your 

hands�

•

Considering that asbestos may cause cancer, 

asbestos - containing materials shall not be 

processed�

•

The power tool could be put down only after the 

parts of power tool is completely static� Accessory 

on the power tool might be clamped during work, 

which may make it difficult for you to control the 

power tool�

•

Appropriate  detector  shall  be  used  to  find  the 

location of hidden power wires� Or you should obtain 

relevant information from local power supply unit� 

Drilling  electric  wires  will  cause  fire  and  electric 

shock� Damaged gas pipe will cause exploration� If 

water pipes are punctured, damage will be caused to 

property�

•

In case a accessory installed on the power tool 

is clamped, you shall shut down the power tool and 

stay calm� At that time, the power tool will produce 

extremely high reactive torque thus resulting in return 

stroke� The accessory installed on the power tool are 

likely to be clamped, for example: hypercharge of 

power tool or skewing of accessory installed on the 

power tool during work�

•

If hidden electric wires or power lines of the 

power tool itself might be cut off during work, you 

must hold the insulated handle to operate the power 

tool� When the power tool is in touch with a charged 

line, the metal parts on the power tool will conduct 

electricity and may cause the operator to get an 

electric shock�

•

During work, you must tightly hold the power tool 

and  ensure  you  stand  firmly.  You  should  hold  the 

power tool with your hands�

•

When operating and using the power tool, you can 

only hold switch position of the main handle rather than 

other parts�

•

Avoid stopping an power tool motor when loaded�

•

Never remove any chips or fragments with your 

power tool's motor running�

•

Use accessories without defects - it will make work-

ing with the power tool easier�

•

The modification of the drill bits design and the use 

of  removable  orifices  and  accessories  not  envisaged 

for this power tool is strictly forbidden� 

•

Do not apply excessive pressure when operating the 

power tool - it can jam the drill bit and overload the 

engine�

•

Do not allow drill bits to jam in the material pro-

cessed� If this occurs, do not try to release them by 

means of the power tool engine� This can put the pow-

er tool out of order�

•

Striking out drill bits jammed in the material pro-

cessed with a hammer or other objects is strictly for-

bidden - metal fragments can hurt both the operator 

and the people nearby�

•

Avoid overheating your power tool, when using it for 

a long time�

Symbols used in the manual

Following symbols are used in the operation manual, 

please remember their meanings� Correct interpreta-

tion of the symbols will allow correct and safe use of 

the power tool�

Symbol

Meaning

Cordless impact drill / 

screwdriver 

Cordless drill / screw

-

driver

Sections marked gray - soft 

grip (with insulated surface)�

Serial number sticker:

CT ��� - model;

XX - date of manufacture;

XXXXXXX - serial number�

Read all safety regulations 

and instructions�

Wear safety goggles�

Wear ear protectors�

Wear a dust mask�

Do not heat the battery 

above 45°C� Protect from 

prolonged exposure to direct 

sunlight�

Do not dispose of the battery 

in a domestic waste con-

tainer�

Do not dispose of the battery 

in the fire.

Protect the battery from the 

rain�

60

min

Battery charging time�

Movement direction�

Rotation direction�