CROWN CT21076HMX - Инструкция по эксплуатации - Страница 29

29

English

Power tool use and care

•

The persons with lowered psychophysical or men-

tal aptitudes as well as children can not operate the 

power tool, if they are not supervised or instructed 

about use of the power tool by a person responsible 

for their safety�

•

Do  not  force  the  power  tool.  Use  the  correct 

power  tool  for  your  application

� The correct power 

tool will do the job better and safer at the rate for which 

it was designed�

•

Do  not  use  the  power  tool  if  the  switch  does  not 

turn  it  on  and  off.

 Any power tool that cannot be con-

trolled with the switch is dangerous and must be repaired�

•

Disconnect the plug from the power source and / 

or the battery pack from the power tool before mak

-

ing  any  adjustments,  changing  accessories,  or 

storing power tools

� Such preventive safety measures 

reduce the risk of starting the power tool accidentally�

•

Store  idle  power  tools  out  of  the  reach  of  chil

-

dren and do not allow persons unfamiliar with the 

power  tool  or  these  instructions  to  operate  the 

power  tool.

 Power tools are dangerous in the hands 

of untrained users�

•

Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 

other condition that may affect the power tool's op

-

eration.  If  damaged,  have  the  power  tool  repaired 

before  use.

 Many accidents are caused by poorly 

maintained power tools�

•

Keep  cutting  tools  sharp  and  clean.

 Properly 

maintained cutting tools with sharp cutting edges are 

less likely to bind and are easier to control�

•

Use  the  power  tool,  accessories  and  tool  bits 

etc.  in  accordance  with  these  instructions,  taking 

into account the working conditions and the work 

to be performed. 

Use of the power tool for operations 

different from those intended could result in a hazard-

ous situation�

•

Keep  handles  and  grasping  surfaces  dry,  clean 

and  free  from  oil  and  grease.

 Slippery handles and 

grasping surfaces do not allow for safe handling and 

control of the tool in unexpected situations�

•

Note that when you operate a power tool, please 

hold the auxiliary handle correctly, which is helpful 

when controlling the power tool� Therefore, proper 

holding can reduce the risk of accidents or injuries�

Battery tool use and care

•

Recharge only with the charger specified by the 

manufacturer.

 A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 

another battery pack�

•

Use power tools only with specifically designat

-

ed battery packs.

 Use of any other battery packs may 

create a risk of injury and fire.

•

When  battery  pack  is  not  in  use,  keep  it  away 

from  other  metal  objects,  like  paper  clips,  coins, 

keys,  nails,  screws  or  other  small  metal  objects, 

that  can  make  a  connection  from  one  terminal  to 

another. 

Shorting the battery terminals together may 

cause burns or a fire.

•

Under  abusive  conditions,  liquid  may  be 

ejected  from  the  battery;  avoid  contact.  If  contact 

accidentally  occurs,  flush  with  water.  If  liquid 

contacts eyes, additionally seek medical help. 

Liquid 

ejected from the battery may cause irritation or burns�

•

Avoid  unintentional  switching  on.  Ensure  the 

on / off switch is in the off position before inserting 

battery pack.

 Carrying the power tool with your finger 

on the on / off switch or inserting the battery pack into 

power tools that have the switch in accidents�

•

Do not open the battery.

 Danger of circuit�

•

In  case  of  damage  and  improper  use  of  the 

battery,  vapors  may  be  emitted.  Provide  for  fresh 

air  and  seek  medical  help  in  case  of  complaints.

The vapors can irritate the respiratory system�

•

When the battery is defective, liquid can escape 

and come into contact with adjacent components

� 

Check any parts concerned� Clean such parts or 

replace them, if required�

•

Protect  the  battery  against  heat,  e.g.,  also 

against  continuous  sun  irradiation  and  fire.

 There 

is danger of explosion�

WARNING! Read all safety warnings and 

all instructions.

•

Protect  the  battery  charger  from  rain  and 

moisture. 

The penetration of water in a battery 

charger increases the risk of electric shock�

•

Do not charge other batteries.

 The battery charger 

is suitable only for charging lithium ion batteries within 

the listed voltage range� Otherwise there is danger of 

fire and explosion.

•

Keep  the  battery  charger  clean.

 Contamination 

may cause the danger of electric shock�

•

Check the battery charger, cable and plug each 

time before using. Do not use the battery charger 

when  defects  are  detected.  Do  not  open  the 

battery charger yourself and have it repaired only 

by  qualified  personnel  using  original  spare  parts.

Damaged battery chargers, cables and plugs increase 

the risk of electric shock�

•

Do  not  operate  the  battery  charger  on  easily 

inflammable surfaces (e.g. , paper , textiles , etc.) or 

in combustible environments.

 There is danger of fire 

due to the heating of the battery charger during charging�

Service

•

Have your power tool serviced by a qualified repair 

person  using  only  identical  replacement  parts.

 This 

will ensure that the safety of the power tool is maintained�

•

Follow instruction for lubricating and changing ac-

cessories�

Special safety warnings

•

Wear ear protectors when impact drilling.

 Expo-

sure to noise can cause hearing loss�

NOTE: 

The above warning applies only to impact drills 

and may be omitted for drills other than impact drills�

•

Use auxiliary handle(s), if supplied with the tool. 

Loss of control can cause personal injury�

•

Hold power tool by insulated gripping surfaces, 

when  performing  an  operation  where  the  cutting 

accessory  may  contact  hidden  wiring  or  its  own 

cord.

 Cutting accessory contacting a "live" wire may 

make exposed metal parts of the power tool "live" and 

could give the operator an electric shock�

Safety  guidelines  during  power  tool  op

-

eration

•

The workpiece shall be fastened� Fixed devices or 

vice shall be used to fasten the workpiece, which will