CROWN CT21072HX-2 BMC - Инструкция по эксплуатации - Страница 22

22

English

WARNING  -  To  reduce  the  risk  of  injury, 

user must read instruction manual!

General safety rules

WARNING!  Read  all  safety  warnings, 

instructions,  illustrations  and  specifica

-

tions provided with this power tool.

 Fail-

ure to follow the warnings and instructions 

may  result  in  electric  shock,  fire  and  /  or  serious  in

-

jury�

Save  all  warnings  and  instructions  for  future 

reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operat-

ed (cordless) power tool�

Work area safety

•

Keep  work  area  clean  and  well  lit.

 Cluttered or 

dark areas invite accidents�

•

Do not operate power tools in explosive atmos

-

pheres, such as in the presence of flammable liq

-

uids, gases or dust.

 Power tools create sparks which 

may ignite the dust or fumes�

•

Keep children and bystanders away while oper

-

ating a power tool.

 Distractions can cause you to lose 

control�

Electrical safety

•

Power  tool  plugs  must  match  the  outlet.  Never 

modify the plug in any way. Do not use any adapter 

plugs  with  earthed  (grounded)  power  tools.

 Un-

modified  plugs  and  matching  outlets  will  reduce  risk 

of electric shock�

•

Avoid  body  contact  with  earthed  or  grounded 

surfaces,  such  as  pipes,  radiators,  ranges  and 

refrigerators.

 There is an increased risk of electric 

shock if your body is earthed or grounded�

•

Do not expose power tools to rain or wet condi

-

tions.

 Water entering a power tool will increase the risk 

of electric shock�

•

Do  not  abuse  the  cord.  Never  use  the  cord  for 

carrying,  pulling  or  unplugging  the  power  tool. 

Keep  cord  away  from  heat,  oil,  sharp  edges  or 

moving parts.

 Damaged or entangled cords increase 

the risk of electric shock�

•

When operating a power tool outdoors, use an ex

-

tension cord suitable for outdoor use.

 Use of a cord 

suitable for outdoor use reduces the risk of electric shock�

•

If operating a power tool in a damp location is una

-

voidable,  use  a  residual  current  device  (RCD)  pro

-

tected supply.

 Use of an RCD reduces the risk of electric 

shock� NOTE! The term "residual current device (RCD)" 

may be replaced by the term "ground fault circuit inter-

rupter (GFCI)" or "earth leakage circuit breaker (ELCB)"�

•

Warning!

 Never touch the exposed metal surfaces 

on gearbox, shield, and so on because touching metal 

surfaces will be interfered with the electromagnetic 

wave, thus causing potential injury or accidents�

Personal safety

•

Stay  alert,  watch  what  you  are  doing  and  use 

common  sense  when  operating  a  power  tool.  Do 

not  use  a  power  tool  while  you  are  tired  or  under 

the  influence  of  drugs,  alcohol  or  medication.

 A 

moment of inattention while operating power tools may 

result in serious personal injury�

•

Use  personal  protective  equipment.  Always 

wear  eye  protection.

 Protective equipment such as 

dust mask, non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will reduce 

personal injuries�

•

Prevent  unintentional  starting.  Ensure  the 

switch  is  in  the  off-position  before  connecting  to 

power source and / or battery pack, picking up or 

carrying the tool

. Carrying power tools with your fin

-

ger on the switch or energising power tools that have 

the switch on invites accidents�

•

Remove  any  adjusting  key  or  wrench  before 

turning the power tool on.

 A wrench or a key left at-

tached to a rotating part of the power tool may result 

in personal injury�

•

Do not overreach. Keep proper footing and bal

-

ance  at  all  times.

 This enables better control of the 

power tool in unexpected situations�

•

Dress  properly.  Do  not  wear  loose  clothing  or 

jewellery.  Keep  your  hair,  clothing  and  gloves 

away from moving parts.

 Loose clothes, jewellery or 

long hair can be caught in moving parts�

•

If  devices  are  provided  for  the  connection  of 

dust  extraction  and  collection  facilities,  ensure 

these are connected and properly used.

 Use of dust 

collection can reduce dust-related hazards�

•

Do not let familiarity gained from frequent use of 

tools allow you to become complacent and ignore 

tool  safety  principles

� A careless action can cause 

severe injury within a fraction of a second�

•

Warning!

 Power tools can produces an electromag-

netic field during operation. This field may under some 

circumstances interfere with active or passive medical 

implants� To reduce the risk of serious or fatal injury, 

we recommend persons with medical implants to con-

sult their physician and the medical implant manufac-

turer before operating this power tool�

Power tool use and care

•

The persons with lowered psychophysical or men-

tal aptitudes as well as children can not operate the 

power tool, if they are not supervised or instructed 

about use of the power tool by a person responsible 

for their safety�

•

Do  not  force  the  power  tool.  Use  the  correct 

power  tool  for  your  application

� The correct power 

tool will do the job better and safer at the rate for which 

it was designed�

•

Do  not  use  the  power  tool  if  the  switch  does 

not turn it on and off.

 Any power tool that cannot be 

controlled with the switch is dangerous and must be 

repaired�

•

Disconnect the plug from the power source and / 

or the battery pack from the power tool before mak

-

ing  any  adjustments,  changing  accessories,  or 

storing power tools

� Such preventive safety measures 

reduce the risk of starting the power tool accidentally�

•

Store  idle  power  tools  out  of  the  reach  of  chil

-

dren and do not allow persons unfamiliar with the 

power  tool  or  these  instructions  to  operate  the 

power  tool.

 Power tools are dangerous in the hands 

of untrained users�

•

Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 

other condition that may affect the power tool's op

-

eration.  If  damaged,  have  the  power  tool  repaired 

before  use.

 Many accidents are caused by poorly 

maintained power tools�