Bosch GPO 14 CE - Инструкция по эксплуатации - Страница 23

24

 | English 

1 619 P09 071 | (29.6.10)

Bosch Power Tools

Working Advice

f

Clamp the workpiece if it does not remain 
stationary due to its own weight.

f

Do not strain the machine so heavily that it 
comes to a standstill.

f

After heavily straining the power tool, con-
tinue to run it at no-load for several minutes 
to cool down the accessory.

For sanding applications on soft materials, e. g., 
gypsum or paint, it is recommended to use the 
rubber sanding plate 

18

 with sanding sheet 

19

.

Cup brushes 

21

 and wheel brushes are suitable 

for rust removal.

Polishing

For the polishing of weathered paint or buffing 
out scratches (e. g., acrylic glass), the machine 
can be equipped with appropriate polishing ac-
cessories such as lamb’s wool bonnet, polishing 
felt or sponge (accessories).
Select a low speed for polishing (stage 1 – 2) in 
order to avoid excessive heating of the surface.
Apply polishing agent crosswise or in a circular 
motion with a polishing sponge and moderate 
pressure, and then allow it to dry lightly.
Polish the partially dried polishing agent with 
crosswise or circular motions using a lamb’s 
wool polishing bonnet.
Clean the polishing accessories regularly to en-
sure good polishing results. Wash out polishing 
accessories with a mild detergent and warm wa-
ter; do not use paint thinner.

Maintenance and Service

Maintenance and Cleaning

f

Before any work on the machine itself, pull 
the mains plug.

f

For safe and proper working, always keep 
the machine and ventilation slots clean.

f

In extreme conditions, always use dust ex-
traction as far as possible. Blow out ventila-
tion slots frequently and install a residual 
current device (RCD). 

When working metals, 

conductive dust can settle in the interior of 
the power tool. The total insulation of the 
power tool can be impaired.

Please store and handle the accessory(-ies) 
carefully.
If the machine should fail despite the care taken 
in manufacturing and testing procedures, repair 
should be carried out by an after-sales service 
centre for Bosch power tools.
In all correspondence and spare parts order, 
please always include the 10-digit article 
number given on the type plate of the machine.

After-sales Service and Customer 

Assistance

Our after-sales service responds to your ques-
tions concerning maintenance and repair of your 
product as well as spare parts. Exploded views 
and information on spare parts can also be 
found under:

www.bosch-pt.com

Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.

Great Britain

Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88

OBJ_BUCH-1284-001.book  Page 24  Tuesday, June 29, 2010  12:51 PM