Bosch GPO 14 CE - Инструкция по эксплуатации - Страница 18

 English | 

19

Bosch Power Tools

1 619 P09 071 | (29.6.10)

f

Maintain a firm grip on the power tool and 
position your body and arm to allow you to 
resist kickback forces. Always use auxiliary 
handle, if provided, for maximum control 
over kickback or torque reaction during 
start-up. 

The operator can control torque re-

actions or kickback forces, if proper precau-
tions are taken.

f

Never place your hand near the rotating ac-
cessory. 

Accessory may kickback over your 

hand.

f

Do not position your body in the area where 
power tool will move if kickback occurs. 

Kickback will propel the tool in direction op-
posite to the wheel’s movement at the point 
of snagging.

f

Use special care when working corners, 
sharp edges, etc. Avoid bouncing and snag-
ging the accessory. 

Corners, sharp edges or 

bouncing have a tendency to snag the rotat-
ing accessory and cause loss of control or 
kickback.

f

Do not attach a saw chain woodcarving 
blade or toothed saw blade. 

Such blades 

create frequent kickback and loss of control 
over the power tool.

Safety warnings specific for sanding opera-
tions

f

Do not use excessively oversized sanding 
disc paper. Follow manufacturers recom-
mendations, when selecting sanding paper. 

Larger sanding paper extending beyond the 
sanding pad presents a laceration hazard and 
may cause snagging, tearing of the disc, or 
kickback.

Safety warnings specific for polishing opera-
tions

f

Do not allow any loose portion of the polish-
ing bonnet or its attachment strings to spin 
freely. Tuck away or trim any loose attach-
ment strings. 

Loose and spinning attach-

ment strings can entangle your fingers or 
snag on the workpiece.

Safety warnings specific for wire brushing 
operations

f

Be aware that wire bristles are thrown by 
the brush even during ordinary operation. 
Do not overstress the wires by applying ex-
cessive load to the brush. 

The wire bristles 

can easily penetrate light clothing and/or 
skin.

f

If the use of a guard is recommended for 
wire brushing, do not allow any interfer-
ence of the wire wheel or brush with the 
guard. 

Wire wheel or brush may expand in 

diameter due to work load and centrifugal 
forces.

Additional safety warnings

Wear safety goggles.

f

Use suitable detectors to determine if utili-
ty lines are hidden in the work area or call 
the local utility company for assistance. 

Contact with electric lines can lead to fire 
and electric shock. Damaging a gas line can 
lead to explosion. Penetrating a water line 
causes property damage or may cause an 
electric shock.

f

Release the On/Off switch and set it to the 
off position when the power supply is inter-
rupted, e. g., in case of a power failure or 
when the mains plug is pulled. 

This prevents 

uncontrolled restarting.

f

When working stone, use dust extraction. 
The vacuum cleaner must be approved for 
the extraction of stone dust. 

Using this 

equipment reduces dust-related hazards.

f

When working with the machine, always 
hold it firmly with both hands and provide 
for a secure stance. 

The power tool is guided 

more secure with both hands.

f

Secure the workpiece. 

A workpiece clamped 

with clamping devices or in a vice is held 
more secure than by hand.

OBJ_BUCH-1284-001.book  Page 19  Tuesday, June 29, 2010  12:51 PM