Роботы-пылесосы xRobot XR-210E Red - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
1. Check whether turning on the switch.
2. Check whether the dustbin, filter and intake are clean, and whether the side brush works.
3. Check whether the battery voltage declines greatly.
The Cleaner doesn’t work or clean poorly
1. Check the battery status of the remote control.
2. Check the battery status of the Robot.
3. Whether check code between the remote control and main body.
4. Check whether the remote control is within the available scope of the signal transmitting.
The remote control doesn’t work
1. Check whether the adaptor is connected well with the charger and whether power LED of
the recharger lighting
2. Check whether the battery power is too low; if so, charge the Cleaner with the adaptor
directly.
3. Make sure there is no barrier in front of the Docking Station .
4. Use the remote controller to let the cleaner go back to the Docking Station
The Cleaner can not charge automatically
1. Clean the dustbin and filter.
2. Check whether the brush or side brush is too dirty.
3. If the noise still too big , you may send back the cleaner to the after sale service
maintenance to add Lubricants..
Increased noise in cleaning
1. Check whether the set cleaning time is over.
2. Check whether there are failure codes on the display by reference of the followings
The Cleaner stops working suddenly and rings intermittently
1. Avoid use in sunlight or dark color carpet .
2. Pat the front bumper..
The cleaner back off continuously
The cleaner dropped from the stair
Use the adaptor to full charged first.
The cleaner can not Auto-Charging after didn’t use in a long time
Don’t disassemble and maintain it by yourself, contact the after sale service maintenance
The cleaner stop to work , but no error code display
10. Trouble shooting :
-20-
