Роботы-пылесосы xRobot XR-210E Red - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Function Guide
Function Information
Press and release till the Cleaner turn right to the direction you
want. It will stop automatically in case of the obstacle.
Turn off/cancel/stop
OK key
UV lamp key
1
．
Turn on the power switch of the cleaner, and press the key can
turn on/off the Cleaner .
2
．
You can stop the running mode by pressing the key .
3
．
You can delete and return to the original setting if you get wrong
sets or want to stop setting.
4
．
Press the key for more than 5s, you can delete all set and memory
and return to the initial status
You must press
“OK”
to save any setting you did
You can turn on/off UV
lamp by pressing the
“UV”
key while the
cleaner is in the Standby mode or running. The on/off set will be
memorized automatically.
Auto Docking Key
While the Cleaner is in the Standby mode or running, the Cleaner will
search the Docking Station for charging after you press “SUN/DOCK”
key.
Forward key
Press “Forward”, the Cleaner will run forward cleaning press
can stop. It will stop automatically in case of the obstacle.
Backward key
Press for long, the Robot will run backward cleaning, and it will
stop after you release the key.
Turn left key
Turn right key
Press and release till the Cleaner turn left to the direction you
want. It will stop automatically in case of the obstacle.
You should use the remote control within 10m (radio signal scope), or you
may fail to control the main body.
The Cleaner may fail to find the Docking Station due to the obstacle,
complex condition or because the battery’ power used up .
1.
2.
-10-
