VITEK VT-1803 - Инструкция по эксплуатации - Страница 9

9

ENGLISH          

 •

Wipe the front bumper (7).

 •

Wipe the vacuum cleaner body (4) with a slightly 
damp cloth and then wipe it dry.

 •

Do not immerse the vacuum cleaner body (4), 
the  charging  station,  the  power  adapter  (29) 
and the connecting cord of the power adapter 
into water or any other liquids. Provide that no 
liquid gets inside the vacuum cleaner body (4).

 •

Do not use solvents or abrasives for cleaning the 
vacuum  cleaner  body  (4),  the  charging  station 
and the power adapter (29).

Removing the battery (15)

 •

Before  you  dispose  of  the  vacuum  cleaner, 
remove the battery and apply to the correspond-
ing  center  for  recycling  of  it.  Do  not  burn  the 
vacuum  cleaner  even  if  it  is  badly  damaged 

without  removing  the  battery  to  avoid  the  bat-
tery explosion.

 •

It is recommended to remove the battery (15) for 
long storage of the vacuum cleaner.

 •

Unscrew two fastening screws of the battery lid 
and remove the lid.

 •

Remove the battery and remove the socket slot 
on the plate. 

STORAGE

 •

Before taking the vacuum cleaner away for long 
term storage, clean its body (4), the dust bin (3) 
and the filters (21, 22).

 •

Remove the battery from the remote control.

 •

Use the original package for storage.

 •

Keep the vacuum cleaner in a dry cool place out 
of reach of children and disabled persons.

Possible troubles and troubleshooting

№ Malfunction

Possible causes

Solution

1

The battery doesn‘t 
charge.

The vacuum cleaner is set improperly on 
the charging station.

Make sure that the contact 
points for battery charging on 
the vacuum cleaner body and on 
the charging station are clean. 
If necessary, wipe the contact 
points.
Slightly move the vacuum cleaner 
body by hands to provide better 
contact with the charging station. 

The charging station power adapter  
is disconnected from the mains. 

Connect the charging station and 
plug the power adapter to the 
mains socket. 

2

The vacuum cleaner 
gives alarms, 
periodically switches 
on and off.

It is possible that foreign objects (wires, 
threads, hanging curtains, etc.) have 
been wound onto the driving wheels of 
the vacuum cleaner.

Remove the foreign objects from 
the driving wheels and from the 
floor.

3

The vacuum cleaner 
finishes cleaning 
ahead of time and 
spontaneously 
returns to the 
charging station.

If the battery charge is too low for the 
room cleaning, the vacuum cleaner 
automatically  returns to the charging 
station.

It is normal. 
Do not interfere with the vacuum 
cleaner operation.

The operation time of the vacuum 
cleaner depends on the cleaning area, 
floor surface, room configuration and 
the selected cleaning mode.

4

The vacuum 
cleaner doesn‘t see 
obstacles

Anti-drop sensors are dirty.

Turn over the vacuum cleaner and 
wipe the anti-drop sensors.

The sensors on the front bumper are dirty. Wipe the front bumper.

5

The vacuum cleaner 
doesn‘t respond to 
the remote control.

The battery in the remote control is 
discharged and has to be replaced.

Remove the battery holder from 
the remote control, remove the old 
battery, install a new one strictly 
following the polarity and install 
the holder into the remote control.

IM VT-1803.indd   9

7/2/19   3:20 PM