Роботы-пылесосы ROWENTA RR7447 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
66
67
5.
IS THERE A PROBLEM WITH YOUR APPLIANCE?
According to model:
•
The charger is getting hot:
4
This is perfectly normal. The vacuum cleaner can remain permanently connected to the charger
without any risk.
• The charger is connected but your appliance is not charging:
- The charger is incorrectly attached to the appliance or is faulty.
4
Check that the charger is properly connected or contact an Approved Services Centre to change
the charger.
• Your appliance stops during use:
- Your appliance may be overheating.
4
Stop the appliance and leave cool for at least 1 hour.
4
If it overheats on repeated occasions, contact the Approved Services Centre.
• The appliance stopped after the charge light was flashing:
- The appliance has run out of battery charge.
4
Recharge the vacuum cleaner.
• The power-brush is not working properly or makes a noise:
- The rotating brush or hose are obstructed.
4
Stop the vacuum cleaner and clean them.
- The brush is worn.
4
Contact an Approved Service Centre to change the brush.
- The belt is worn.
4
Contact an Approved Service Centre to change the belt.
• The power-brush stops during vacuuming:
- The safety function has been triggered.
4
Stop the vacuum cleaner. Check that nothing is obstructing the rotation of the brush; if there is an
obstruction, remove it and clean the power-brush, then turn on the vacuum cleaner.
• Your vacuum cleaner is not vacuuming as well, is making noise, whistling:
- The intake channel is partially blocked.
4
Unblock it
- The dust collector is full.
Empty it and clean it.
- The dust collector is not properly fitted.
4
Re-position it correctly.
- The intake head is clogged.
4
Remove the power-brush and clean it.
- The protective foam filter is saturated.
4
Clean it.
EN
5.
RR74XX
Serial No.
Error
Error description
1
Left wheel error
Left wheel is not working, overload in left wheel.
Indicator POWER flashes twice and beeps once.
2
Right wheel error
Right wheel is not working, overload in left wheel.
Indicator POWER flashes 3 times and beeps once.
3
robot lifted error
The robot is lifted over 1 second.
Indicator POWER flashes 4 times and beeps once.
4
Front wheel error
Front wheel is not working, is stucked.
Indicator POWER flashes 5 times and beeps once.
5
Cliff sensors error
Cliff sensors are not working.
Indicator POWER flashes 6 times and beeps once.
6
Low battery error
POWER is going to be dead.
Indicator POWER flashes 7 times and beeps once.
7
Front bumper error
Switch on the left or right side of bumper is not restored.
Indicator POWER flashes 8 times and beeps once.
8
Middel brush error
Main brush is not working, overload.
Indicator DOCKING flashes 2 times and beeps once.
9
Side brush error
Side brush is not working, overload.
Indicator DOCKING flashes 3 times and beeps once.
10
Wall sensor error
Wall sensor error.
Indicator DOCKING flashes 4 times and beep once.
11
Fan motor error
Fan motor is not working, overload.
Indicator DOCKING flashes 5 times and beeps once.
12
No dustbin error
No dustbin.
Indicator DOCKING flashes 6 times and beeps once.
13
Charging error
Robot is not well connnected to the docking station.
Indicator DOCKING flashes 7 times and beeps once.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
