Dreame D10S Plus - Инструкция по эксплуатации - Страница 8

10

11

EN

EN

1. Remove the protective strips

2. Install the side brush

Click

Before Use

This product works with the Dreamehome app, which can be used to control your device.

Connecting with the Dreamehome App

Note:

 If your robot cannot connect to the app successfully, reset the Wi-Fi and add the 

device again.

Note:

 Install the side brush until it clicks into place.

1. Download the Dreamehome App

3. Reset Wi-Fi

Scan the QR code on the robot, or search "Dreamehome" in the 

app store to download and install the app based on your needs.

Simultaneously press and hold the buttons   and   until you 

hear a voice say, “Waiting for the network configuration.” Once the 

Wi-Fi indicator is blinking slowly, the Wi-Fi has been successfully 

reset.

Wi-Fi Indicator

·

Blinking slowly: To be connected

·

Blinking quickly: Connecting

·

On: Connected

Under the 

Cover

2. Add Device

Open the Dreamehome app,  tap "   " in the upper right, and then 

scan the QR code above again to add "DreameBot D10s Plus". 

Please follow the prompts to finish the Wi-Fi connection.

·

Only 2.4 GHz Wi-Fi networks are supported.

·

Due to upgrades in the app software, the actual operations may be different from the 

statements in this manual. Please follow the instructions based on the current app 

version.

Note:

3. Connect to a power outlet and start charging

Within the Good 

Wi-Fi Range 

Put away the power cord 

into the cord storage slot

Note:

·

Keep the immediate area 1.5 m in front of the base and 0.5 m to its both 

sides clear of objects.

·

Make sure that no objects might block the signaling area.

Place the base on level ground against the wall and connect it to 

a power outlet. Place the robot onto the base to charge. The robot 

will turn on automatically and begin charging. It is recommended 

to fully charge your robot before first-time use.

About the Auto-Empty Base

It is recommended that the robot set out from the base before cleaning. Do not 

move the base while the robot is cleaning. This ensures that the robot returns to 

base smoothly. 
After the robot completes the cleaning task and automatically returns to the 

base, the base will start auto-empty. More settings can be operated on the app. 

> 0.3 m

> 0.5 m

> 0.5 m

> 1.5 m