Bosch GOP 18V-28 - Инструкция по эксплуатации - Страница 19

Application tool

Material

Application

fleeces for cleaning and for texturing wood, removing rust
from metal and for keying varnish, polishing felt for pre-
polishing

Profile sander

Wood, pipes/profiles,
paint, varnish, filler, metal

Convenient and efficient sanding of profiles up to a dia-
meter of 55 mm;
red sanding sheets for sanding wood, pipes/profiles, var-
nish, filler and metal

Bi-metal plunge cut
saw blade for wood
and metal

Softwood, soft plastics,
plasterboard, thin-walled
aluminium profiles and
non-ferrous metal pro-
files, thin sheet metal,
non-hardened nails and
screws

Small separating cuts and plunge cuts;
example: Cutting a recess for sockets, cutting a copper
pipe so that it is flush with a surface, making plunge cuts in
plasterboard

Delicate adaptation work in wood;
example: Sawing recesses for locks and fittings

HCS plunge cut
saw blade for wood

Wood-based materials,
soft plastics

Separating cuts and plunge saw cuts;
including sawing close to edges, in corners and in difficult-
to-reach areas;
example: Thin plunge cut in solid wood for installing a
ventilation grille

Bi-metal plunge cut
saw blade, hard-
wood

Hardwood, laminated
boards

Plunge cuts in laminated boards or hardwood;
example: Installation of skylights

TC plunge cut saw
blade, metal

Metal, extremely abrasive
materials, fibreglass, plas-
terboard, cement-bonded
fibreboard

Plunge cuts in extremely abrasive materials or metal;
example: Cutting kitchen front covers, easy cutting
through hardened screws, nails and stainless steel

Bi-metal plunge cut
saw blade for wood
and metal

Softwood, hardwood,
veneered boards, plastic-
coated boards, non-
hardened nails and
screws

Plunge cuts in laminated boards or hardwood;
example: Shortening door frames, recesses for a shelf

TC-Riff segment
saw blade

Cement joints, soft wall
tiles, fibreglass-reinforced
plastics, porous concrete

Making cuts near edges, in corners or in difficult-to-reach
areas;
example: Removing joints between wall tiles for improve-
ment work, cutting recesses in tiles, plasterboard or
plastics

Diamond-Riff seg-
ment saw blade

Cement joints, soft wall
tiles, epoxy resin, fibre-
glass-reinforced plastics

Precise routing and cutting of tile/joint material, epoxy
resin and fibreglass-reinforced plastics;
example: Producing small cut-outs in soft wall tiles and
routing recesses in fibreglass-reinforced plastic

TC-Riff Delta plate Mortar, concrete residue,

wood, abrasive materials

Rasping and sanding on a hard surface;
example: Removing mortar or tile adhesive (e.g. when re-
placing damaged tiles), removing carpet adhesive residue

TC-Riff grout and
mortar remover

Mortar, joints, epoxy
resin, fibreglass-rein-
forced plastics, abrasive
materials

Routing and cutting of joint material and tile material, as
well as rasping and sanding on a hard surface;
example: Removing tile adhesive and joint mortar

HCS multi blade

Roofing felt, carpets, arti-
ficial turf, cardboard, PVC
flooring

Fast and precise cutting of soft material and flexible abras-
ive materials;
example: Cutting carpets, cardboard, PVC flooring, roof-
ing felt, etc.

English | 

19

Bosch Power Tools

1 609 92A 4DA | (08.10.2018)