Bosch GOP 18V-28 - Инструкция по эксплуатации - Страница 16

16

 | English

1 609 92A 4DA | (08.10.2018)

Bosch Power Tools

tool repaired before use.

 Many accidents are caused by

poorly maintained power tools.

u

Keep cutting tools sharp and clean. 

 Properly main-

tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.

u

Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. 

 Use of the power tool for operations different

from those intended could result in a hazardous situation.

u

Keep handles and grasping surfaces dry, clean and
free from oil and grease. 

 Slippery handles and grasping

surfaces do not allow for safe handling and control of the
tool in unexpected situations.

Battery tool use and care

u

Recharge only with the charger specified by the manu-
facturer. 

 A charger that is suitable for one type of bat-

tery pack may create a risk of fire when used with another
battery pack.

u

Use power tools only with specifically designated bat-
tery packs. 

 Use of any other battery packs may create a

risk of injury and fire.

u

When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another. 

Shorting the battery terminals together may cause burns
or a fire.

u

Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help.

 Liquid ejected from the bat-

tery may cause irritation or burns.

u

Do not use a battery pack or tool that is damaged or
modified. 

 Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or risk
of injury.

u

Do not expose a battery pack or tool to fire or excess-
ive temperature. 

 Exposure to fire or temperature above

130 °C may cause explosion.

u

Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. 

Charging improperly or at

temperatures outside the specified range may damage
the battery and increase the risk of fire.

Service

u

Have your power tool serviced by a qualified repair
person using only identical replacement parts. 

This

will ensure that the safety of the power tool is maintained.

u

Never service damaged battery packs. 

 Service of bat-

tery packs should only be performed by the manufacturer
or authorized service providers.

Safety information for multi-cutters

u

Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring.

 Cutting accessory contact-

ing a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an electric
shock.

u

Use clamps or another practical way to secure and
support the workpiece to a stable platform.

 Holding

the workpiece by hand or against your body leaves it un-
stable and may lead to loss of control.

u

Only use the power tool for dry sanding. 

Water entering

a power tool will increase the risk of electric shock.

u

Warning: Danger of fire! Avoid overheating the work-
piece and the sander. Always empty the dust collector
before taking a break from work. 

Sanding dust in the

dust bag, microfilter, paper bag (or in the filter bag or va-
cuum cleaner filter) can spontaneously combust under
certain conditions, for example if flying sparks are cre-
ated when sanding metals. This risk is increased if the
sanding dust is mixed with paint or polyurethane residue
or with other chemical substances and if the workpiece is
hot as a result of prolonged work.

u

Keep hands away from the sawing area. Do not reach
under the workpiece.

 Contact with the saw blade can

lead to injuries.

u

Clean the air vents on your power tool regularly.

 The

motor’s fan will draw the dust inside the housing and ex-
cessive accumulation of powdered metal may cause elec-
trical hazards.

u

Use suitable detectors to determine if there are hid-
den supply lines or contact the local utility company
for assistance.

 Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.

u

Hold the power tool firmly with both hands and make
sure you have a stable footing.

 The power tool can be

more securely guided with both hands.

u

When changing the application tool, wear protective
gloves.

Application tools can become hot when used for

prolonged periods of time.

u

Do not scrape any dampened materials (e.g. wallpa-
per) or on damp surfaces.

 Water entering a power tool

increases the risk of electric shock.

u

Do not treat the surface you will be working on with
any fluids that contain solvents.

 Poisonous vapours

may develop due to the materials heating up when being
scraped.

u

Take particular care when handling scrapers and
blades.

 The application tools are very sharp. Danger of in-

jury.

u

In case of damage and improper use of the battery, va-
pours may be emitted. 

Ensure the area is well-ventilated

and seek medical attention should you experience any ad-
verse effects. The vapours may irritate the respiratory
system.