Bosch GOP 18 V-EC - Инструкция по эксплуатации - Страница 16

16

 | English 

1 609 92A 117 | (7.4.15)

Bosch Power Tools

An estimation of the level of exposure to vibration should also 
take into account the times when the tool is switched off or 
when it is running but not actually doing the job. This may signif-
icantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator 
from the effects of vibration such as: maintain the tool and the 
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2011/65/EU, until 
19 April 2016: 2004/108/EC, from 20 April 2016 on: 
2014/30/EU, 2006/42/EC including their amendments and 
complies with the following standards: EN 60745-1, 
EN 60745-2-4.

Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY

Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 19.02.2015

Assembly

Battery Charging



Use only the chargers listed in the technical data. 

Only 

these chargers are matched to the lithium-ion battery of 
your power tool.

Note: 

The battery supplied is partially charged. To ensure full 

capacity of the battery, completely charge the battery in the 
battery charger before using your power tool for the first time.

The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure 
does not damage the battery.

Removing the battery

The battery 

5

 is equipped with two locking levels that should 

prevent the battery from falling out when pushing the battery 
unlocking button 

3

 unintentionally. As long as the battery is 

inserted in the power tool, it is held in position by means of a 
spring.

To remove the battery 

5

, press the battery unlocking button 

3

and pull the battery out of the power tool toward the rear. 

Do 

not exert any force.

Battery Charge-control Indication

The three green LEDs of the battery charge-control indicator 

6

 indicate the charge condition of the battery 

5

. For safety 

reasons, it is only possible to check the status of the charge 
condition when the machine is at a standstill.

Press button 

7

 to indicate the charge condition. This is also 

possible when the battery 

5

 is removed.

When no LED lights up after pushing button 

7

, then the bat-

tery is defective and must be replaced.

Changing the Tool



Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.) as well as during transport 
and storage, remove the battery from the power tool. 

There is danger of injury when unintentionally actuating 
the On/Off switch.



Wear protective gloves when changing application 
tools/accessories. 

Contact with the application tool/ac-

cessory can lead to injuries.

Selecting the Application Tool/Accessory

Henk Becker
Executive Vice President
Engineering

Helmut Heinzelmann
Head of Product Certification
PT/ETM9

LED

Capacity

Continuous lighting 3 x green



2/3

Continuous lighting 2 x green



1/3

Continuous lighting 1 x green

< 1/3

Flashing light 1 x green

Reserve

Accessory

Material

HCS wood seg-
ment saw blade*

Wooden materials, 
plastic

BIM segment saw 
blade*

Wooden materials, 
plastic, non-ferrous 
metals

HCS plunge cut 
saw blades, 
wood*

Wooden materials, 
plastic, gypsum and 
other soft materials

BIM plunge cut 
saw blades, 
metal *

Metal (e. g. unhard-
ened nails, screws, 
smaller profiles), 
non-ferrous metals

BIM plunge cut 
saw blade, wood 
and metal *

Wood, metal, non-
ferrous metals

HM-Riff segment 
saw blade*

Grouting joints, soft 
wall tiles, glass-fibre 
reinforces plastic 
and other abrasive 
materials

HM-Riff delta 
plate *

Scraper, rigid *

Carpets, coverings

* Optional accessory; for the complete accessories please see Bosch ac-
cessory programme.

OBJ_BUCH-1808-002.book  Page 16  Tuesday, April 7, 2015  4:33 PM