Philips FC8710 - Инструкция по эксплуатации - Страница 9

Charging directly from the mains

 1 

 Insert the small plug of the adapter into the socket on the robot (1). Insert the adapter into  

a wall socket (2) (Fig. 20).

 2 

 Press the power switch to switch on the robot.

 3 

 When the robot is connected to the mains correctly, the lon/off indicator starts flashing.  

This indicates that the robot is charging.

 4 

 When the rechargeable battery is fully charged, the on/off indicator of the robot stops flashing.

Preparing the room for a cleaning run

 - Before you star t the robot on its cleaning run, make sure that you remove all loose and fragile 

objects from the floor (Fig. 21).

Using your robot

Starting and stopping

 1 

 Press the on/off button (Fig. 22).

 - You can press the on/off button on the robot.

 - You can also press the on/off button on the remote control (FC8710) (Fig. 23).

Tip: If you press the on/off button on the docking station while the robot is charging, the robot starts 

cleaning as soon as the rechargeable battery is full (Fig. 24).

 2 

 The on/off indicator starts flashing slowly and the robot starts cleaning (Fig. 25).

 3 

 The robot cleans in auto-cleaning mode until its battery runs low. In auto cleaning mode.  

It follows repeated sequences of Z-pattern, random, wall-following and spiral movements (Fig. 26).

Note: To select an individual mode, press one of the mode buttons on the remote control (FC8710).  

See section ‘Cleaning mode selection’ for more details.

 4 

 When the battery runs low, the on/off indicator starts flashing quickly and the robot returns 

to the docking station to charge (Fig. 19).

 5 

 You can also press the on/off button to interrupt or stop the cleaning run. If you press the 

on/off button again and there is still enough energy in the rechargeable battery, the robot 

continues cleaning in the auto cleaning mode.

 6 

 To make the robot return to the docking station before the rechargeable battery runs low, 

press the docking button on the remote control (FC8710).  (Fig. 27)

 - The on/off indicator lights up and the robot returns to the docking station (Fig. 28).

Note: If you did not start the robot from the docking station, it does not return to the docking station 

automatically when the rechargeable battery runs low. If there is still enough energy in the rechargeable 

battery, you can press the docking button on the remote control to make the robot return to the  

docking station. If the rechargeable battery is completely empty, you have to place the robot on  

the docking station manually.   

ENGLISH

9