Philips FC8710 - Инструкция по эксплуатации - Страница 13

Troubleshooting

This chapter summarises the most common problems you could encounter with this appliance.  

If you are unable to solve the problem with the information below, visit 

www.philips.com/support

for a list of frequently asked questions or contact the Consumer Care Centre in your countr y. 

Problem

Cause

Solution

The robot does 

not star t cleaning 

when I press the 

on/off button.

The rechargeable batter y 

is empty. 

Charge the rechargeable batter y  

(see chapter ‘Preparing for use’).

The small plug is still 

inser ted in the socket on 

the robot.

The robot does not work on mains power.  

It only works on its rechargeable batter y. 

Therefore, always disconnect the adapter  

from the robot and the mains before use.

The warning 

indicator flashes 

quickly.

One or both wheels are 

stuck.

Set the power switch to ‘off ’. Remove the fluff, 

hair, thread or wire that is caught around the 

wheel suspension.

One or both side 

brushes are stuck.

Clean the side brushes (see chapter  

‘Cleaning and maintenance’).

The top cover is not 

present or is not closed 

properly.

When the top cover is not present or is not 

closed properly, the robot does not work.  

Place the top cover on the robot properly.

The bumper is stuck.

Press the on/off button. Lift the robot so that  

its bumper comes free. Place the robot at some 

distance from the obstacle and press the on/off 

button to make it resume cleaning.

The robot was lifted 

while it was cleaning.

Press the on/off button. Place the robot on the 

floor. Then press the on/off button to make the 

robot resume cleaning.

The robot does 

not clean 

properly.

The bristles of one or 

both side brushes are 

crooked or bent.

Soak the brush or brushes in warm water for 

 a while. If this does not restore the bristles to 

their proper shape, replace the side brushes  

(see  chapter ‘Replacement’).

The filter in the dust 

container is dir ty.

Clean the filter in the dust container with a cloth 

or a toothbrush with soft bristles.
If brushing does not help to clean the filter, 

replace the filter with a new one. We advise  

you to replace the filter at least once a year.

The suction opening in 

the bottom of the dust 

container is clogged.

Clean the suction opening  

(see chapter ‘Cleaning and maintenance’).

The front wheel is 

jammed with hair or 

other dir t.

Clean the front wheel  

(see chapter ‘Cleaning and maintenance’).

ENGLISH

13