Einhell TE-CS 18/165-1 Li (4331207) - Инструкция по эксплуатации - Страница 18

GB

- 18 -

terials and plastics. In the case of plastic workpie-

ces, be careful not to overheat the tips of the saw 

blade and melt the plastic.

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a 

case of misuse. The user / operator and not the 

manufacturer will be liable for any damage or inju-

ries of any kind caused as a result of this.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial 

applications. Our warranty will be voided if the 

machine is used in commercial, trade or industrial 

businesses or for equivalent purposes.

4. Technical data

Motor power supply:  ............................... 18 V DC
Idling speed: ........................................ 4200 min

-1

Cutting depth at 90°:  ................................ 54 mm
Cutting depth at 45°:  ................................ 35 mm
Saw blade:  .......................................... Ø 165 mm
Blade holder:  ......................................... Ø 20 mm
Blade thickness:  ...................................... 1.6 mm
Weight:  .......................................................2.4 kg

Danger!

Sound and vibration

Sound and vibration values were measured in 

accordance with EN 62841.

L

pA

 sound pressure level  ........................ 93 dB(A)

K

pA

 uncertainty  ............................................. 3 dB

L

WA

 sound power level   ........................ 104 dB(A)

K

WA

 uncertainty ............................................. 3 dB

Wear ear-mu

ff

 s.

The impact of noise can cause damage to hea-

ring.

Total vibration values (vector sum of three direc-

tions) determined in accordance with EN 62841.

Handle

Vibration emission value a

h, W

 = 1.3 m/s

2

K uncertainty = 1.5 m/s

2

Additional handle

Vibration emission value a

h, W

 = 1,2 m/s

2

K uncertainty = 1.5 m/s

2

The stated vibration emission levels and stated 

noise emission values were measured in ac-

cordance with a set of standardized criteria and 

can be used to compare one power tool with 

another.

The stated vibration emission levels and stated 

noise emission values can also be used to make 

an initial assessment of exposure.

Warning:

The vibration and noise emission levels may vary 

from the level speci

fi

 ed during actual use, depen-

ding on the way in which the power tool is used, 

especially the type of workpiece it is used for.

Keep the noise emissions and vibrations to a 

minimum.

• 

 Only use appliances which are in perfect wor-

king order.

• 

 Service and clean the appliance regularly.

• 

 Adapt your working style to suit the appliance.

• 

 Do not overload the appliance.

• 

 Have the appliance serviced whenever ne-

cessary.

• 

 Switch the appliance off when it is not in use.

Caution!

Residual risks

Even if you use this electric power tool in 

accordance with instructions, certain resi-

dual risks cannot be rules out. The following 

hazards may arise in connection with the 

equipment’s construction and layout:

1.   Lung damage if no suitable protective dust 

mask is used.

2.   Damage to hearing if no suitable ear protec-

tion is used.

3.   Health damage caused by hand-arm vib-

rations if the equipment is used over a pro-

longed period or is not properly guided and 

maintained.

5.  Before starting the equipment

Warning!

Always remove the battery pack before making 

adjustments to the equipment.

Anl_TE_CS_18_165-1_Li_Solo_SPK13.indb   18

Anl_TE_CS_18_165-1_Li_Solo_SPK13.indb   18

12.05.2022   15:07:56

12.05.2022   15:07:56