Einhell TE-CS 18/165-1 Li (4331207) - Инструкция по эксплуатации - Страница 17

GB

- 17 -

Danger!

 When using the equipment, a few safety pre-

cautions must be observed to avoid injuries and 

damage. Please read the complete operating 

instructions and safety regulations with due care. 

Keep this manual in a safe place, so that the in-

formation is available at all times. If you give the 

equipment to any other person, hand over these 

operating instructions and safety regulations as 

well. We cannot accept any liability for damage 

or accidents which arise due to a failure to follow 

these instructions and the safety instructions.

Explanation of the symbols used (see Fig. 17)

1.

 Danger!

 - Read the operating instructions to 

reduce the risk of injury.

2. 

Caution!  Wear ear-mu

ff

 s.

 The impact of noi-

se can cause damage to hearing.

3. 

Caution! Wear a breathing mask. 

Dust 

which is injurious to health can be generated 

when working on wood and other materials. 

Never use the device to work on any materi-

als containing asbestos!

4.

  Caution! Wear safety goggles. 

Sparks ge-

nerated during working or splinters, chips and 

dust emitted by the device can cause loss of 

sight.

5. 

Pull out the plug or battery pack!

6.

  Caution! Do not look into the light beam.

1. Safety regulations

The corresponding safety information can be 

found in the enclosed booklet.

Warning!

Read all the safety information, instructions, 

illustrations and technical data provided on 

or with this power tool.

 Failure to adhere to the 

following instructions may result in electric shock, 

fi

 re and/or serious injury.

Keep all the safety information and instruc-

tions in a safe place for future use.

2.  Layout and items supplied

2.1 Layout (Fig. 1a/1b)

1.    Handle

2.   ON/OFF switch

3.   Locking button for ON/OFF switch

4.   Locking lever for cutting depth setting

5.   LED lamp

6.   Soleplate

7.   Locking lever for miter setting

8.   Locking screw for parallel stop

9.   Scale for miter angle

10.  Additional handle

11.  Spindle lock

12.  Saw blade

13.  Saw blade wrench

14.  Connection for sawdust extractor

15.  Line guide

16.  Parallel stop

17.  Screw for securing the saw blade

18.  Flange

19.  Swing guard hood

20.  Lever for swing guard hood

2.2 Items supplied

Please check that the article is complete as 

speci

fi

 ed in the scope of delivery. If parts are 

missing, please contact our service center or the 

sales outlet where you made your purchase at 

the latest within 5 working days after purchasing 

the product and upon presentation of a valid bill 

of purchase. Also, refer to the warranty table in 

the service information at the end of the operating 

instructions.

• 

 Open the packaging and take out the equip-

ment with care.

• 

 Remove the packaging material and any 

packaging and/or transportation braces (if 

available).

• 

 Check to see if all items are supplied.

• 

 Inspect the equipment and accessories for 

transport damage.

• 

 If possible, please keep the packaging until 

the end of the guarantee period.

Danger!

The equipment and packaging material are 

not toys. Do not let children play with plastic 

bags, foils or small parts. There is a danger of 

swallowing or su

ff

 ocating!

• 

Cordless Handheld Circular Saw

• 

 Saw  blade

• 

 Saw blade wrench

• 

Parallel stop

• 

Original operating instructions

• 

 Safety  instructions 

3. Proper use

The cordless handheld circular saw is designed 

for sawing straight cuts in wood, wood-type ma-

Anl_TE_CS_18_165-1_Li_Solo_SPK13.indb   17

Anl_TE_CS_18_165-1_Li_Solo_SPK13.indb   17

12.05.2022   15:07:56

12.05.2022   15:07:56