Bosch GBH 2 26 DBR - Инструкция по эксплуатации - Страница 15

14

 | English

1 619 929 787 • 4.5.07

d) Store idle power tools out of the reach of

children and do not allow persons unfa-
miliar with the power tool or these
instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, break-
age of parts and any other condition that
may affect the power tool’s operation. If
damaged, have the power tool repaired
before use. 

Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. 

Prop-

erly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool

bits etc. in accordance with these instruc-
tions, taking into account the working
conditions and the work to be performed.

Use of the power tool for operations different

from those intended could result in a hazardous

situation.

5) Service

a) Have your power tool serviced by a quali-

fied repair person using only identical
replacement parts. 

This  will  ensure  that  the

safety of the power tool is maintained.

Machine-specific 

Safety Warnings

¢

Wear hearing protection. 

Exposure to noise can

cause hearing loss.

¢

Always use the auxiliary handle supplied
with the machine. 

Loss of control can cause per-

sonal injury.

¢

Use suitable detectors to determine if utility
lines are hidden in the work area or call the
local utility company for assistance. 

Contact

with electric lines can lead to fire and electric

shock. Damaging a gas line can lead to explosion.

Penetrating a water line causes property damage

or may cause an electric shock.

¢

When working with the machine, always
hold it firmly with both hands and provide for
a secure stance. 

The power tool is guided more

secure with both hands.

¢

Secure the workpiece. 

A workpiece clamped

with clamping devices or in a vice is held more se-

cure than by hand.

¢

Do not work materials containing asbestos.

Asbestos is considered carcinogenic.

¢

Take protective measures when dust can
develop during working that is harmful to
one’s health, combustible or explosive.

Example: Some dusts are regarded as carcino-

genic. Wear a dust mask and work with dust/chip

extraction when connectable.

¢

Keep your workplace clean. 

Blends of materi-

als are particularly dangerous. Dust from light

alloys can burn or explode.

¢

Always wait until the machine has come to a
complete stop before placing it down. 

The

tool insert can jam and lead to loss of control over

the power tool.

¢

Never use the machine with a damaged
cable. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. 

Damaged cables increase

the risk of an electric shock.

Functional Description

Read all safety warnings and all
instructions. 

Failure to follow the warn-

ings and instructions may result in elec-

tric shock, fire and/or serious injury.
While reading the operating instruc-

tions, unfold the graphics page for the

machine and leave it open.

Intended Use

The machine is intended for hammer drilling in con-

crete, brick and stone, as well as for light chiselling

work. It is also suitable for drilling without impact in

wood, metal, ceramic and plastic. Machines with elec-

tronic control and right/left rotation are also suitable

for screwdriving and thread cutting.

Product Features

The numbering of the product features refers to the

illustration of the machine on the graphics page.

1

SDS-plus tool holder

2

Dust protection cap

3

Locking sleeve

4

Rotational direction switch

5

On/Off switch

6

Utility hook

7

Release button for mode selector switch

8

Mode selector switch

9

Button for depth stop adjustment

10

Depth stop

11

Auxiliary handle

OBJ_BUCH-370-001.book  Page 14  Friday, May 4, 2007  5:30 PM