Smeg ALFA625EH - Инструкция по эксплуатации - Страница 3

Instructions

49

ENEN

•  Have qualified personnel carry 

out installation and assistance 
interventions according to the 
standards in force.

•  Do not try to repair the appliance 

yourself or without the intervention 
of a qualified technician.

•  If the power supply cable is 

damaged, it must be replaced by 
the manufacturer, by Technical 
Support or other qualified 
personnel in order to ensure a 
hazard is not created.

•  Do not place containers with 

liquids or food products which can 
melt during cooking on the upper 
shelves which are not visible.

•  The floor next to the appliance 

could be very slippery. Be very 
careful.

•  The terminal indicated by the 

symbol links up parts that are 
normally earthed. Connect the 
appliances appropriately using 
this terminal in order to make sure 
that they are equipotential.

•  Have the electrical connection 

performed by authorised technical 
personnel.

•  The appliance must be connected 

to ground in compliance with 
electrical system safety standards.

•  Disconnect the mains power 

supply.

•  Do not pull the cable to remove 

the plug.

•  Use H07RN-F cables that can 

withstand a temperature of at least 
75°C.

•  The tightening torque of the 

screws of the terminal supply wires 
must be 1.5 - 2 Nm.

Risk of damaging the appliance

•  Racks and trays have to be 

inserted into the side guides until 
they come to a complete stop. The 
mechanical safety locks that 
prevent the rack from being taken 
out accidentally must face 
downwards and towards the back 
of the appliance.

•  Do not seat on the appliance.
•  Do not use abrasive or corrosive 

detergents (e.g. scouring 
powders, stain removers and 
metallic sponges) on glass parts.

•  Do not use steam jets to clean the 

appliance.