Laurastar IZZI Plus - Инструкция по эксплуатации - Страница 7

- 8 -

Protective Guard installation  

(Textile-Guard and Surface-Guard)

• Take the DMS Steamer (2) in your hand (

H

).

PLEASE NOTE: 

Before starting to use the device or after 

an extended break, press the steam button 2 or 3 times 

(8) away from any surfaces or people (

I

). This is to drain 

any condensation from the aluminium soleplate and 

prevent water marks on fabrics or surfaces.

•  Check that the installed Guard is the right one for your 

use purpose and keep the other Guard within easy reach. 

• Place the front of the DMS Steamer (2) first at the front of:

- the Textile-Guard (15) if you want to use your hygienic 

steamer on fabrics,

- or the Surface-Guard (16) if you want to use your 

hygienic steamer on surfaces.

• Then lower it to attach the back of the Guard (

J

).

PLEASE NOTE: 

You may remove from the DMS Steamer 

and change the guard while it is still hot. 

CAUTION: The aluminium soleplate may be hot. Do 

not leave the DMS Steamer in direct contact with 

the material without any Guard as it may melt or burn it. 

START UP AND STEP BY STEP

Turning on your device

• Plug in the electric plug (

E

).

•  Press on the main switch (5), the white indicator light 

will flash for 3 to 6 minutes (

F

). 

• When the white light stops flashing, the device is ready.

PLEASE NOTE:

 For your comfort and safety, Laurastar 

hygienic steamer switches off after 10 minutes of 

inactivity (

G

).

PLEASE NOTE: Heating up the device without 

water may damage it and will invalidate the 

warranty of your device. Do not direct the steam 

towards people or animals.

E

10 min.

x2-3

3-6 min.

F

G

H

I

J

EN

manuel_IZZI_Int_150x200_VD.indb   8

manuel_IZZI_Int_150x200_VD.indb   8

8/10/2021   11:16 AM

8/10/2021   11:16 AM