Laurastar IZZI Plus - Инструкция по эксплуатации - Страница 6

- 7 -

Installing your Laurastar hygienic steamer

•  Remove the unit from the box using the handle (14) and lay 

it down on a flat, stable, heat-resistant surface (

A

).

Installing your filter cartridge

• Remove the packaging foil.
•  Place the cartridge in the compartment at the bottom of 

the water tank 

(C).

   Use the supplied filter cartridge to fully enjoy your 

Laurastar device for longer.

Filling the water tank

•  Lift up the lid of the water tank, then remove it by pulling on 

the lid (

B

). Fill it with tap water (

D

).

• Reinsert the water tank with the lid up, then close it.

   What water should you use?

Your Laurastar hygienic steamer has been designed 

to work with 

tap water (D).

For easier mobility

 of your hygienic steamer 

around the house, use Laurastar IZZI CART 

(available on our online store or from an official 

Laurastar retailer).

NOTE: Never use additives (e.g. scented water), 

water containing chemicals or water collected 

from the tumble dryer, as these products will interfere with 

the proper functioning of your Laurastar.

DANGER! KEEP OUT OF THE REACH OF 

CHILDREN. DO NOT DRINK THE FILTERED 

WATER.

WARNING: The water tank MUST be filled with 

water for the device to work.

INSTALLATION

D

A

C

B

manuel_IZZI_Int_150x200_VD.indb   7

manuel_IZZI_Int_150x200_VD.indb   7

8/10/2021   11:16 AM

8/10/2021   11:16 AM