Laurastar IZZI Plus - Инструкция по эксплуатации - Страница 11

- 12 -

Before calling the Laurastar Customer Service department, please check the following 

points:

Return to the Customer Service department

Switch off the appliance and disconnect the plug. Locate your purchase contract, 

invoice or receipt. Telephone the Customer Service department and follow the 

instructions given.

PROBLEMS AND SOLUTIONS

Symptom

Likely cause

Remedy

STEAM GENERA

TOR

Makes a buzzing noise when steam 

is emitted from the aluminium 

soleplate.

Generator vibration (1).

This noise is normal for a new 

appliance, it will disappear in the 

course of use.

Makes a crackling noise when the 

appliance is switched on.

The appliance has been set to 

heat up.

This noise is normal when the 

appliance is heating up.

The white indicator light flashes 

during disinfection.

The water has been reheated.

The appliance is working normally.

The aluminium soleplate no longer 

emits steam. The pressure has 

fallen.

• The reservoir (4) is empty.

• The appliance is switched off.

• The plug (10) is disconnected.

• Fill the reservoir with water.

• Press the appliance’s On/Off 

switch (5).

• Connect the plug.

The light remains red when the 

reservoir is full.

The reservoir has not been correctly 

replaced.

Remove the reservoir and replace 

it correctly in the base, with the 

cover open.

DMS STEAMER

The soleplate drips.

• The DMS Steamer is not ready.

• The appliance has not been 

drained recently.

• The reservoir has been rinsed 

with a product other than water.

• Wait until the white indicator 

light on the On/Off switch (5) stops 

flashing.

• Drain the appliance.

• Call the Customer Service 

department.

The aluminium soleplate does not 

heat up.

• The plug (10) is disconnected.

• The On/Off switch (5) is off.

• Connect the plug.

• Switch on the appliance.

EN

manuel_IZZI_Int_150x200_VD.indb   12

manuel_IZZI_Int_150x200_VD.indb   12

8/10/2021   11:16 AM

8/10/2021   11:16 AM