Philips GC362/80 - Инструкция по эксплуатации - Страница 15

Problem

Possible cause

Solution

EN

The steamer does 
not heat up.

The steamer is not plugged 
in properly or not switched 
on.

Check if the mains plug is 
inserted properly and its wall 
socket is working. 
Check if the steamer is 
switched on. 

The steamer does 
not produce any 
steam.

The steamer is not plugged 
in properly or not switched 
on.

Check if the mains plug is 
inserted properly and its wall 
socket is working. 
Check if the steamer is 
switched on. 

The steamer has not 
heated up sufficiently.

Let the steamer heat up for 
45 seconds (steam-ready 
lights up). The steamer is 
ready to be used when the 
light goes off.

You have not pressed the 
steam trigger fully.

Press the steam trigger fully 
for a few seconds.

The water level in the water 
tank is too low.

Unplug the steamer and refill 
the water tank.

The water tank is not in 
place.

Insert the water tank 
properly.

Water droplets drip 
from the steamer 
head.

The steamer has not 
heated up sufficiently.

Let the steamer heat up for 
45 seconds (steam-ready 
lights up). The steamer is 
ready to be used when the 
light goes off.

The steamer 
produces a pumping 
sound/the handle 
vibrates.

Water is pumped to 
the steamer head to be 
converted into steam.

This is normal.

Water inside the tank has 
all been used up.

Refill the water tank.

Water leaks from the 
water tank.

Water tank filling door is not 
closed properly

Ensure that filling door is 
closed properly.

Steam leaves stains 
on the garment or 
impurities come out 
of the steamer head

Apart from tap water, you 
have filled other liquids / 
additives or descaling 
agents into the water tank.

Use only tap, demineralized 
or filtered water when filling 
up the water tank.

15