Bosch MFW 2515W - Инструкция по эксплуатации - Страница 25

 25

en

Shredding attachment

Shredding attachment

For shredding, grating and slicing items 

such as cheese, fruit, vegetables, nuts, 

almonds, dried bread rolls and other hard 

foodstuffs. Not suitable for cutting up 

fibrous foods such as celery or leek. Select 

the appropriate insert depending on the 

type and consistency of the food to be 

processed. 

X

 “Tips” see page 28

Preparation

W

Risk of injury!

Do not reach into the sharp blades and 

edges of the shredding, grating and slicing 

inserts.

X

Fig.  

G

■

Fit the required insert into the housing.

Note: 

The insert is automatically locked 

when the appliance is switched on.

The shredding attachment is now prepared.

Use

W

Risk of injury!

– Do not reach into the feed chute with 

your hands.

– Only use the pusher when adding more 

food.

Caution!

– The pusher can only be inserted in one 

direction.

– Remove hard shells (e.g. on nuts).

– Do not apply great force with the pusher.

X

Sequence of figures 

H

1. 

Fit the prepared attachment onto the 

drive of the base unit, holding it at an 

angle.

2. 

Turn the attachment anticlockwise until 

you hear it click into position.

3. 

Prepare your food. Chop up large parts 

beforehand so they fit into the feed 

chute without having to press them in.

4. 

Place a suitable container under the 

attachment. Add the prepared food to 

the filling tray.

5. 

Connect the mains plug. Switch on the 

appliance.

6. 

Use the pusher to slide the food down 

the feed chute, applying light pressure. 

The food is now cut up or shredded.

7. 

Once you have finished, switch off the 

appliance and pull out the mains plug.

8. 

Pull out the pusher.

9. 

Hold down the release button and 

turn the attachment clockwise until it 

disengages.

10. 

Remove the attachment, take it apart 

and clean all parts. 

X

 “Care and daily 

cleaning” see page 26

Fruit press attachment

For squeezing juice out of soft fruits such 

as  raspberries, currants, strawberries and 

tomatoes. This attachment is not suitable 

for apples or grapes. The attachment is also 

not suitable for hard fruits or vegetables like 

carrots and beetroot.

Preparation

Note:

 selection of the filter insert 

determines the content of fruit pulp in the 

juice. Do not press fruit whose pips are 

similar in diameter to the hole diameter in 

the filter insert (e.g. raspberries).

X

Fig. 

I

■

Make sure that the sealing rings are 

fitted onto the filter holder and the worm 

gear. If not, insert them into the sealing 

grooves of these parts.

1. 

Insert the filter insert into the filter holder 

and press it into place. 

2. 

Insert the worm gear into the housing. 

3. 

Insert the filter holder into the housing. 

Lug on the filter holder must be situated 

in the recess on the housing.

4. 

Fit the threaded ring onto the housing 

and screw tight in the clockwise 

direction without using force.

5. 

Screw pulp nozzle into the filter holder.

6. 

Place the outlet funnel onto the filter 

holder until it audibly clicks into place.

The fruit press attachment is now prepared.